The specific method of use is as follows:
1. High temperature vulcanization transfer, first print the pattern to be printed or screen printed on BOPET polyester film through 160-350 mesh, and then paste the film on rubber products, vulcanize 10-30 through 140-180 degrees Celsius After a few minutes, the pattern on the decal paper was completely transferred to the rubber product.
2. Transfer first and then vulcanize to achieve the same school effect. There are two transfer methods: water transfer and cold transfer. After water transfer nine is completely dried with cellophane printing, apply some solvent to the rubber products and apply the printed glass decal Stick on rubber products, then wipe some water on the cellophane, peel off the cellophane; cold transfer is printed on PP paper, the release agent is printed on the PP paper first, and then printed with ink after drying, and coated on the rubber products Apply solvent, then paste the PP paper, and then remove the PP paper.
SQQ ink should be used for direct printing on some rubber products with more elasticity such as balloons. It has the advantages of large elasticity, bright colors and good adhesion.
The specific method is as follows: fill the balloon with a part of the gas and fix it on the printing table, so that the part to be printed is exposed on the table, and then print directly with 120-300 mesh screen. It should be noted that the ink must be completely dried before the gas is released and the hardness of the scraper is not suitable. Too high.
Best Body Spray For Women,Body Mist For Women,Fragrance Mist,Body Spray For Women
Zchoise Cosmetic Factory , https://www.gzzchoise.com