Buy plate furniture must pay attention to environmental protection

Due to its sleek style, diverse colors and low price, panel furniture is favored by more and more people, especially for young people who are decorated for wedding rooms, and ten minutes of love for panel furniture. However, the reporter found in the building materials market that the same is the plate furniture, the composition of the plate and the price of the finished product are very different. Many buyers pay more attention to the appearance and color of the furniture, but not enough attention to its material, quality and environmental performance.

It is important to understand the content of the material.

The panel furniture is a disassembled modular furniture with wood-based panels as the main substrate and the basic structure of the panels. It is very convenient to assemble and disassemble. The panel furniture with high processing precision can be disassembled and installed many times for convenient transportation because the substrate is broken. The original physical structure of the wood, so when the temperature and humidity change greatly, the deformation of the wood-based panel is better than the solid wood, and the quality is relatively stable. However, in the market, many merchants have different interpretations of the composition of “wooden panels”. Some sales people introduced that the use of panel furniture is actually a MDF. The wood scraps are broken and mixed with other hardness materials. Some sales people say that the material is made of pure wood and then crushed. However, even if the material is also described as "pressed and crushed after pure wood", the cross-section samples taken by the salesperson are not the same.

In this regard, Sun Xiuying, the store manager of Beijing Yifeng Furniture Co., Ltd. said that good plates should be made of real wood broken and pressed. It is necessary to peel the wood, remove the branches, and leave only pure wood. Moreover, pressing and processing into a sheet with large intermediate particles and small particles on both sides is more helpful for pressing the facing material, and the nail holding force of the material is better and stronger.

"Look at the cut surface of the board to see the problem." Sun Xiuying said that the panel furniture can not see anything from the appearance, mainly depends on its internal material, the middle of the large particles, small particles on both sides can be seen from the cut surface intuitively, At the same time, you can use your nails to slap the section of the board. If it is easy to remove the traces, the density is low. It may be that the paperboard is shredded. Such products are inferior products. Once blistered, problems will arise.

Environmental protection mainly depends on the plate gum

Many people think that because of the large amount of glue used in panel furniture, environmental protection is relatively poor, and many shops that operate panel furniture can smell a pungent chemical taste. It is understood that most of the furniture with excessive formaldehyde use cheap artificial boards, so the price of the whole set of furniture is often very low. Due to the intensive use of inferior glue in cheap man-made boards, the amount of formaldehyde released is seriously exceeded.

Sun Xiuying said, in fact, good sheet furniture, formaldehyde content is particularly low, in the grade, E2 level is in line with domestic standards, E1 level meets European standards, E0 level is the most environmentally friendly world top standard. The higher the environmental standards for board selection, the better the environmental protection. In China, Jilin Sengong Lushuihe board can reach the E0 standard. The national standard specifies that the formaldehyde content does not exceed 1.5 mg/L, while the E0 grade sheet has a colloidal formaldehyde content of less than 0.5 mg/L. The furniture is also very environmentally friendly.

At the same time, the use of edge banding and edge banding glue also directly affects the environmental protection of the product. Have an understanding of the edge-sealing process of furniture brands.

Detail surface hardware can not be ignored

The panel furniture is pressed and the surface finish is also important. Sun Xiuying said that the surface of good panel furniture should be resistant to acid and alkali, bumping, scratching and high temperature, which is convenient for extending the service life of furniture.

At the same time, the color of the panel furniture is more diverse, the walnut color, the white maple color, the high-gloss white and other fashionable colors, can be well matched with the modern minimalist, simple European style decoration style, more versatile. However, do you know that when selecting panel furniture, you should also carefully check whether the color of the inner and outer walls is the same?

The reporter found that some of the panel furniture sold on the market is white maple, but inside is walnut. Sun Xiuying said that such furniture is mostly produced by small factories, which affects the appearance and grade of products, such as drawers, wardrobes, etc., and should choose products with the same color and pattern on the inner and outer walls.

In addition, the quality of the hardware also determines the overall quality of the panel furniture, good hardware can allow the furniture to be dismantled multiple times without problems. For example, a slide rail, a three-section slide, etc., are preferably made of a steel material.