Maintenance method of constant temperature water bath after use
1. Clean the instrument immediately after use
2. After each use, put the water in the water bath clean, use a brush to brush off the coarse debris in the water bath, and clear the pot. Wipe the inner and outer surfaces of the water bath with a soft cloth, then wipe dry with a cleaning cloth.
3. Effect evaluation: There should be no water droplets on the inner surface of the equipment, and the outer surface of the equipment should be bright and clean, without stains.
4. When the water bath is used, it must be reliably grounded, and water cannot overflow into the control box.
5. The water bath must not be without water or the water level is lower than the electric heating tube to prevent the electric heating tube from bursting.
6. Perform maintenance inspection of the instrument once a month, and fill in the maintenance records in time.
low profile outdoor flood lights,Led Light Strips to Light a Room,Led Lights and Lamps
Jilin Province Yuaoda Trading Co., Ltd , https://www.yuaodacn.com