[ Chinese wardrobe network ] With the improvement of people's living standards, people gradually pay attention to the quality of life, especially in the purchase of furniture, solid wood wardrobes are increasingly favored by consumers because of their natural beauty and environmental protection functions.
Nowadays, many custom solid wood wardrobes on the market use multi-layer composite panels (also called plywood and thin core panels). These panels are made of multi-layer glue of fir or poplar boards. The glue usage is much larger than that of the finger joints. It is the most commonly used material for hand-made furniture. Due to the unsightly appearance of the wood grain on the surface, it is rarely painted directly, and it is usually attached to the plywood.
The real solid wood furniture surface can generally see the real texture of the wood, simple and calm, occasional tree knots, fresh and natural materials, natural or chemical pollution, in line with the sublime nature of the human heart. Fully harvested from all kinds of pure natural wood, it exudes the breath of nature, the amount of glue used is small, the environmental protection far exceeds the particle board, and the composite multi-layer board. The pattern and feel of the solid wood panels are far from those comparable to those of the panels.
In the selection of solid wood wardrobes, domestic solid wood furniture is taken as an example. The main types are: eucalyptus, teak, oak, cherry, ash, rubber wood, pine, fir, etc. Among them, eucalyptus, ash, oak, cherry Wood and other broad-leaved forest species are the most valuable. Due to the precious wood, non-skinned furniture is expensive. Fir is the fastest growing and cheapest, and is used in furniture made by woodworking. For example, the visible surface of the solid wood wardrobe of Yitong International Home, including the door panel, the drawer panel, the top floor and the left and right side panel decorative lines are all directly imported from the United States imported red oak; the side panels, the back panel and the middle panel are made of rubber rubber.
Experts remind you that when you pick, you can start with the details. For example, a cabinet door, the appearance looks like a pattern, and the front and back sides generally have corresponding patterns. If the correspondence is very good, it is usually a solid wood cabinet door. In addition, look at the knot is also a good way to identify pure solid wood. Look at the location of the scar side, and then find the corresponding scar on the other side. In addition, the identification panel wardrobe also has a small trick, which is to carefully observe the hinge groove and the eye-opening, and expose the internal structure, so it can be seen whether the particle board or the medium density board is used. It is best to let the seller issue relevant quality inspection reports, generally the above will be clear about the composition of the material.
Paper Pallet,Paper Pallet Tray,Paper Pallet Dimensions,Paper Pallet For Shipping
DONGGUAN YEE HUP TRADING CO,.LTD , https://www.yeehupack.com