Recently, the heavy rains in Tianjin have caused inconvenience to the citizens' travel, and they have also had a significant impact on our home life. The long-term precipitation caused different degrees of water seepage on the walls, floors or ceilings of many residents' homes. Some of the households on the first floor had water accumulation, and the furniture showed different degrees of moisture and water. Good furniture fell off the skin, rusted, and mildewed. It’s a pity to throw it away. So how to solve these problems? To this end, the new home reporter interviewed Dou Xueqiang, an engineer at the Bohai Building Materials Center, to give readers some good ways to repair furniture.
The material determines the degree of mildew. Do not expose to the sun. <br> General furniture is divided into materials, which can be roughly divided into panel furniture, solid wood furniture and metal furniture. Panel furniture is generally sealed and has a strong moisture resistance. However, the furniture joint is a sanitary corner. If it is not cleaned, it will cause the protective layer to separate from the internal wood. When the moisture content of the wood is increased, it will expand and deform, and in severe cases, the surface sheet will be cracked.
In case of such problems, you can first put the moisture-proof bag in the damp area to absorb moisture, and then use the air conditioner to dry the damp part. When using the air conditioner, be careful not to blow it directly, otherwise it will cause the skin to be brittle.
After the damp, the solid wood furniture will have small water drops on the outer paint surface, and there will be sporadic mildew spots. When cleaning, first remove the mildew on the furniture with water or mild detergent, then use the dehumidification equipment. (Air conditioning in the home can be) Lightly blowing the damp part, do not blow directly when dehumidifying, remember not to worry, must slowly remove the water. Finally, wipe gently with a cotton cloth or a soft dry towel.
Wooden furniture must be “dry†and should not be exposed to the sun. Otherwise, the skin and internal gradient of the furniture will increase, which will cause the furniture to crack and lose its use value. In the usual maintenance, the panel furniture pays attention to the protective layer on the surface and tries to protect it from falling off. The solid wood furniture can be applied once every time to the walnut oil, so that the cells of the furniture can be kept full and not easily invaded by water vapor.
After the metal furniture is damp or soaked in water, the rust of the peeled part of the paint should be checked first. If the rust is not serious, the rust can be gently cleaned with the rust inhibitor. If it is serious, you can use sandpaper or grinding wheel to clean it. After the bright metal layer is exposed, wipe it with a dry cloth and then apply anti-rust paint.
Metal furniture should not be placed close to the place where the water vapor is heavy. You can put only the moisture absorption bag nearby to dehumidify.
50X200mm 3D Wire Mesh Fence is also known as 3D bending fence curvy welded fencing, triangle mesh fence,, etc. Triangle bend fence is pretty light yet durable
Wire mesh fence is a type of fencing made from wire mesh that is commonly used for security and containment purposes. It is made up of a series of wires that are woven or welded together to create a mesh pattern.
Wire mesh fence is often used for perimeter security, as it provides a strong barrier that is difficult to climb or cut through. It is also commonly used for animal containment, such as in agricultural settings. Wire mesh fence can be installed in a variety of configurations, including as a standalone fence or as a component of a larger security system.
3D-2X8 Open Mesh Wire Fence,Open Mesh Wire Fence,Open Wire Fencing,Open Wire Fence
HEBEI DOUDOU METAL FENCE PRODUCTS CO.,LTD. , https://www.doudoufencing.com