Canine β-endorphin (β-EP) elisa kit instruction manual
Elisa kit specifications: 48-well configuration / 96-well configuration
Standard diluent: 1.5ml × 1 bottle
Enzyme label reagent: 3 ml × 1 bottle (48) / 6 ml × 1 bottle (96)
ã€Canine β Endorphin (β-EP) elisa kit】 This reagent is for research use only
Calculation:
Taking the concentration of the standard as the abscissa and the OD value as the ordinate, draw a standard curve on the coordinate paper, and find the corresponding concentration from the standard curve according to the OD value of the sample; then multiply by the dilution factor; Calculate the linear regression equation of the standard curve with the OD value, substitute the OD value of the sample into the equation, calculate the sample concentration, and multiply it by the dilution factor to obtain the actual concentration of the sample.
Kit composition:
Sealing film: 2 pieces (48) / 2 pieces (96)
Instructions: 1 copy
Sealed bag: 1
Standard product: 2700ng / L 0.5ml × 1 bottle 0.5ml × 1 bottle Store at 2-8 ℃
Enzyme-coated plate: 1 × 48 1 × 96 2-8 ℃
Sample diluent: 3ml × 1 bottle 6ml × 1 bottle Store at 2-8 ℃
Developer A solution: 3ml × 1 bottle 6 ml × 1 bottle Store at 2-8 ℃
Developer B: 3ml × 1 bottle 6 ml × 1 bottle Store at 2-8 ℃
Stop solution: 3ml × 1 bottle 6ml × 1 bottle Store at 2-8 ℃
Concentrated washing solution: (20ml × 20 times) × 1 bottle (20ml × 30 times) × 1 bottle Store at 2-8 ℃
Experimental principle:
This kit uses the double antibody sandwich method to determine the level of canine β-endorphin (β-EP) in the specimen. Microporous plates were coated with purified canine β endorphin (β-EP) antibody to make solid phase antibodies, β endorphin (β-EP) was added to the microwells coated with mAb in turn, and then labeled with HRP The β-endorphin (β-EP) antibody binds to form an antibody-antigen-enzyme-labeled antibody complex, and after thorough washing, the substrate TMB is added for color development. TMB is converted into blue under the catalysis of HRP enzyme, and into the final yellow under the action of acid. The color depth is positively correlated with β-endorphin (β-EP) in the sample. The absorbance (OD value) was measured with a microplate reader at a wavelength of 450 nm, and the concentration of canine β-endorphin (β-EP) in the sample was calculated by a standard curve.
Purpose: This kit is used to determine the content of β-endorphin (β-EP) in canine serum, plasma and related liquid samples.
Pledge:
Delivery period: payment to delivery.
Free technical consultation and guidance during working hours. Please call to provide customers with sample testing services to maximize the validity of the experimental results (free substitute testing).
Storage conditions and validity period:
Kit storage: 2-8 ℃ | Validity: 6 months
[Canine β-endorphin (β-EP) elisa kit] Sample processing and requirements:
1. Serum: room temperature blood coagulates naturally for 10-20 minutes, centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully and centrifuge again if a precipitate appears during storage.
2. Plasma: EDTA or sodium citrate should be selected as the anticoagulant according to the requirements of the specimen, mixed for 10-20 minutes, and centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, it should be centrifuged again.
3. Urine: collected in a sterile tube and centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, centrifuge again. Pleural and ascites, cerebrospinal fluid reference implementation.
4. Cell culture supernatant: When detecting secreted components, collect with a sterile tube. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. When detecting the components inside the cells, dilute the cell suspension with PBS (PH7.2-7.4), and the cell concentration will reach about 1 million / ml. Through repeated freezing and thawing, the cells are destroyed and the intracellular components are released. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, it should be centrifuged again.
5. Organize the specimen: after cutting the specimen, weigh it. Add a certain amount of PBS, PH7.4. Quickly freeze and save with liquid nitrogen for later use. After the specimen melts, it still maintains a temperature of 2-8 ° C. Add a certain amount of PBS (PH7.4) and homogenize the specimen with a manual or homogenizer. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. After aliquoting, a portion is to be tested, and the rest is frozen for future use.
6. The specimen should be extracted as soon as possible after collection. The extraction should be carried out according to relevant literature. The experiment should be carried out as soon as possible after extraction. If the test cannot be performed immediately, the specimen can be stored at -20 ℃, but repeated freezing and thawing should be avoided.
7. The sample containing NaN3 cannot be detected because NaN3 inhibits the activity of horseradish peroxidase (HRP).
Steps
1. Dilution and loading of standard products: set 10 standard wells on the enzyme-coated plate, add 100 μl of standard products in the first and second wells, and then add standard products in the first and second wells 50μl of diluent, mix well; then take 100μl from the first well and the second well and add them to the third and fourth wells respectively, and then add 50μl of standard diluent to the third and fourth wells respectively, mix well; Then take 50μl each in the third and fourth wells and discard it, then add 50μl each to the fifth and sixth wells, and then add 50ul of the standard dilution solution to the fifth and sixth wells respectively, and mix well; After mixing, take 50μl from the fifth and sixth wells and add them to the seventh and eighth wells respectively. Then add 50μl of the standard dilution solution to the seventh and eighth wells respectively. Take 50μl from the eight wells and add them to the ninth and tenth wells. Then add 50μl of the standard dilution solution to the ninth and tenth wells. After mixing, take 50μl from the ninth and tenth wells and discard. (After dilution, the volume of each well is 50μl, and the concentrations are 1800ng / L, 1200ng / L, 600ng / L, 300ng / L, 150ng / L).
2. Add samples: set up blank wells (the blank control wells do not add samples and enzyme reagents, the rest of the steps are the same) and the sample wells to be tested. Add 40μl of sample diluent to the test sample well of the enzyme-coated plate, and then add 10μl of the sample to be tested (the final dilution of the sample is 5 times). Add the sample and add the sample to the bottom of the well of the microplate, try not to touch the wall of the well, shake gently to mix.
3. Incubation: Seal the plate with a sealing plate and incubate at 37 ° C for 30 minutes.
4. Mixing solution: Dilute 30 times (20 times of 48T) concentrated washing liquid with distilled water 30 times (20 times of 48T) and then use.
5. Washing: Carefully peel off the sealing film, discard the liquid, spin dry, fill each well with the washing liquid, let it stand for 30 seconds and then discard, repeat this 5 times, pat dry.
6. Add enzyme: add 50μl of enzyme label reagent to each well, except blank well.
7. Incubation: The operation is the same as 3.
8. Washing: The operation is the same as 5.
9. Color development: add 50μl of developer A to each well, then add 50μl of developer B, mix gently, and develop at 37 ° C in the dark for 15 minutes.
10. Termination: Add 50μl of stop solution to each well to stop the reaction (at this time the blue will turn to yellow).
11. Determination: Measure the absorbance (OD value) of each well in sequence with the blank air conditioner at zero and 450 nm wavelength. The measurement should be carried out within 15 minutes after adding the stop solution.
ã€Canine β Endorphin (β-EP) elisa kit】 Precautions:
1. The kit should be equilibrated at room temperature for 15-30 minutes before being taken out of the refrigerated environment. If the enzyme label coated plate is unopened, the strip should be stored in a sealed bag.
2. Crystals may be precipitated in the concentrated washing liquid, which can be heated and dissolved in a water bath during dilution, and the results will not be affected during washing.
3. The sampler should be used at each step of sample addition, and the accuracy should be regularly checked to avoid test errors. It is best to control the sampling time within 5 minutes. If there are many specimens, it is recommended to use a volley gun to add samples.
4. Please make a standard curve at the same time of each measurement, it is best to make a double hole. If the content of the test substance in the specimen is too high (the OD value of the sample is greater than the OD value of the first well of the standard well), please first dilute it with a certain multiple (n times) of the sample diluent and then determine it. When calculating, please multiply the total dilution Multiple (× n × 5).
5. The sealing film is limited to one-time use to avoid cross-contamination.
6. Please keep the substrate away from light.
7. Strictly follow the instructions, and the test results must be determined by the microplate reader.
8. All samples, washing liquids and various wastes should be treated as infectious agents.
9. The components of different batches of this reagent shall not be mixed.
10. If there is any difference with the English manual, the English manual shall prevail.
Kit performance:
1. The correlation coefficient R between the linear regression of the sample and the expected concentration is above 0.95.
2. The batch and approval shall be less than 9% and 11% respectively
examination range:
0.2IU / L-6IU / L
The company's professional enzyme-free services for many years: ELISA kits, standard products | reference materials, biological reagents, antibodies, culture media, serum, pharmaceutical intermediates, APIs and other scientific research reagents, quality assurance, low prices, national key laboratories and domestic The universities have long-term designated suppliers, with strong technical force and a group of professional technicians and sales personnel, providing comprehensive technical support and perfect after-sales service for our customers. Welcome to inquire!
Put your best foot forward every time you walk out the door. Our 46-inch-long shoe storage rack bench features a series of cubbies sized 3.5 to 10 inches to hold and organize your best footwear. A space-saving addition to any space, it holds up to 10 pairs of shoes to keep them organized and easily accessible. This storage solution fits of variety of footwear including boots, heels, sneakers, and more. Have a variety of organizing needs. This multipurpose furniture piece is an ideal place for storing more than just shoes, conveniently store various items in your home like books, bags, kids` toys, and linens. Beyond storage, this piece features a soft, foam bench cushion covered with linen fabric that provides comfortable seating as you get ready for your day. High-density foam with 2.25" foam thickness provides reliable comfort. Rest assured your bench storage is made with top quality materials like MDF wood and high-density foam to provide an easy-to-clean furniture piece that can support up to 400-pounds.
OPTIMAL STORAGE SPACE: Versatile storage furniture is built with 10 cubbies from 3.5 to nearly 16 inches high to fit every shoe type: sandals, tennis shoes, high heels, boots, and more
MULTIPURPOSE DESIGN: Great in any entryway, this furniture piece also serves as a bench and safe place for storing magazines, linens, and more
THICK BENCH CUSHION: Features a high-density foam cushion atop the bench to add optimal comfort as you sit and put shoes on or take them off to unwind
DURABLE COMPOSITION: Crafted with tough engineered wood, the shoe rack is made sturdy to withstand years of use
KEEPS SHOES ORGANIZED: This home for your shoe helps keep them organized while protecting them from wear-and-tear or verve-racking misplacement
Shoes Storage Bench,Wooden Shoes Bench,Wood Shoes Bench,Shoe Rack With Bench,Shoe Bench With Seat
Jinan Tri-Tiger Technology Development Co., Ltd , https://www.tritigerwooden.com