Slab wardrobe purchase has a small door panel wardrobe small knowledge introduction

[ Chinese wardrobe net ] The panel wardrobe mainly refers to the furniture made by medium-density fiberboard or particleboard for surface veneering, etc., and the panel wardrobe is more affordable than the solid wood wardrobe, so what are the tricks for the purchase of the panel wardrobe? Today, the Chinese wardrobe network gives Everyone introduces the small knowledge of the panel wardrobe and hopes to help you.

Edge sealing of panel wardrobe

Pay attention to the advantages and disadvantages of the edge-sealing material, pay attention to whether the edge banding is uneven or lifted. The wardrobe is recommended to pay special attention to whether it is sealed on all sides - although formaldehyde-free adhesives are used, the wood-based panels are more or less volatile during the production process, and the edges are tightly sealed. Of course, it is good for environmental protection in the living room.

The firmness of the panel wardrobe

First, the gap between the door and the drawer of the wardrobe. If the gap is large, it means that the work is rough, and the time will be deformed. Second, it is a single box or a double box. Usually, in addition to the outer layer, the inside of the wardrobe is also There should be a layer of panels, which is called a double box, and the double box wardrobe is both beautiful and strong.

Slab wardrobe design

Plate wardrobe paint

Are there any streaks in the pigment? Are the pigments in the corners too thick? Are there cracks or bubbles? These are all carefully examined. Also ask the salesperson, a few paints on the closet. Of course, the more times you have, the better.

Hinge slot for panel wardrobe

From the hinge groove and the eye-opening, it can be seen that the plate wardrobe material is medium density or particleboard. One of the best methods is to carefully observe the hinge groove and the eye-opening area, and expose the internal structure. It can be seen whether the particle board is used. MDF.

Panel wardrobe hardware

The use of hardware, free to disassemble and assemble is the biggest advantage of the panel wardrobe, so the quality of the connector is closely related to the quality of the entire wardrobe. The quality of the hardware depends on whether it has been verified. The imported brands also have poor quality products.

If you buy a slatted wardrobe from the above aspects, then you can basically buy a satisfactory and authentic panel wardrobe. I believe that Xiaobian’s sharing will help everyone and make their decoration more perfect.

Led Gaming Chair

Taihe Fangyuan Muye Co.,Ltd , https://www.fyofficefurniture.com

Posted on