1. Match:
Match is the most convenient tool for ignition. Bring more matches marked with "non-safety" and "can be marked anywhere" and put them in a bundle in a waterproof container to prevent them from rubbing against each other and from burning spontaneously, and also prevent the match itself from becoming damp.
Note: There is also a way to remedy damp matches. If the hair is dry and not greasy, damp matches can be rubbed in the hair and static electricity from the hair can make it dry.
In addition, matches can be prevented from becoming damp by dropping wax on matches. When firing, the wax layer can be peeled off with a fingernail. Use a convex lens: intense sunlight focused through the convex lens can generate enough heat to ignite the fire. Among them, the most rapid fire is the irradiation of gasoline and alcohol, which can ignite the fire within 1-2 seconds.
The magnifier or telescope and the convex lens in the camera can serve you instead of a convex lens. In addition, you can set fire on the spotlight of the flashlight bowl, and you can take fire toward the sun. If the ice cube is processed into a medium thickness in an ice-snow environment, a thin peripheral shape may be used instead of the convex lens.
2. Slamming fire:
Find a piece of hard stone to make a "flint" and use a knife's back or a small piece of steel to hit the "flint" downwards, causing the spark to fall onto the large fire. A toothed hacksaw produces more Mars than an ordinary knife. When the fire begins to smoke, slowly blow or fan it to make it an open flame. Of course, not all stones can ignite the kind of fire. The sparks that the stone hit must have a certain amount of heat and duration to ignite the fire.
3. Battery ignition:
If there is a large battery, connect the positive and negative poles to the ends of the peeled pencil core. In a moment, the pencil core will burn like a red wire.
If you are traveling by car, you may take two long wires and connect them to the positive and negative terminals of the battery. If there is no wire, you can use two wrenches or other metal tools instead. If the wire is not long enough, the battery can be removed from the car. Slowly contact the ends of the two wires. A short will cause a spark. At this time, a cloth stained with gasoline is the best kind of fire.
4. Bow drill to take fire:
Use a strong tree branch or bamboo piece to tie a shoelace, string, or belt into a bow. Wrap a dry stick on the bow and use it to quickly rotate on a small piece of hardwood. This will drill black powder, and finally, these powders will produce smoke and spark, ignite the fire.
5. Rattan fire:
Find a dry tree trunk, open it, open it, open the crack, put it on fire, use a rattan about two feet long, put it behind the fire, and step on the trunk with your feet and quickly twitch the rattan. Friction and heat to ignite the fire.
6. Other methods:
Rubbing the glass on a flat board can also give off heat. When intense heat is applied, fire will be blown.
Two pieces of soft wood or bamboo pieces can also be used to force the fire to rub against each other, and the bottom is covered with palm bark or the dried material at the bottom of the coconut leaves. You can also plan a straight ditch at the bottom of a piece of softwood, and then use a spear-shaped hardwood tip before and after the "plough" line, so that first produce a fire, and finally ignite it
Pet Plastic Tube With Metal Cap
NANTONG OUFEIYA IMP& EXP CO.,LTD , https://www.jsnantongoufeiya.com