PS detergent packaging pre-print design Raiders (c)

5. Making spiral wave effect

(1) Create a new channel, select an elliptical marquee tool box to select a perfect circle, set the "feather radius" to: "150" pixels, and fill it with black. Select a small positive circle in the middle box again, and set the “feather radius” to “100” pixels, and press the delete key to delete it. The result is shown in Figure 9.

(2) Select the [Filter] | [Distortion] | [Rotate Twist] command and set the parameters to: Angle: "900" degrees, as shown in Figure 10.

(3) Similarly, convert the channel to a selection, return to the layer and create a new layer, filled with white. Press "Ctrl+T" to perform the [Free Transform] command and place it in place. The effect is shown in Figure 11.

Figure 11 Making a wave effect

(4) Make water droplet effect. First, select [Pen Tool] to check the shape of the bead. After converting to the selected area, fill it with white, and then use the “pencil tool” to perform spray painting. The color is “blue”. The effect is shown in Figure 12.

6. Add a landscape effect

Open the corresponding material file on the CD-ROM [Wuyishan.jpg] and use the Magic Wand Tool to quickly extract the landscape image. Click on the white area in the image and select the [Select]|[Inverse] command to invert the selection. Select [Move tool] to drag the image into the design.

Select [Pen Tool] to select the image selection area that needs to be masked out. Click the [Add Vector Mask] button to quickly add the image mask. The effect is shown in Figure 13.

(one two three four five six seven eight nine)