Yachen office furniture teaches you how to distinguish inferior furniture

Yachen office furniture teaches you how to distinguish inferior furniture! Material traps are difficult to distinguish. When consumers buy furniture, they have doubts that there is no obvious difference in the appearance of furniture. But why are the prices far apart?

In fact, there is a big difference in the materials used in furniture production. Some manufacturers have many traps in the production of furniture, such as cutting corners and stealing columns, which need to be carefully identified to be seen. Use inferior substrate

The use of substrates that are not dried and worm-like, such furniture has a high moisture content, which can easily cause deformation or cracking after the finished furniture. Furniture made from decaying or worm-eaten wood can seriously collapse furniture. Substrate mixing assembly

Since the wood-based panel furniture adopts the method of veneer decoration on the outside of the substrate, although the parts of the furniture cabinet have the same appearance, some of the substrates in the furniture are moved by the manufacturer. For example, some furniture cabinet front and door use melamine board that meets environmental protection and quality requirements, while the back panel of the cabinet uses large core board with more formaldehyde emission.

Internal production cut corners

Since the wood-based panels used in panel furniture are all made of adhesive bonding and are very sensitive to water, their waterproof performance must be ensured by the veneering and edge-sealing treatment of the panels. In order to save costs, some manufacturers do not seal the joint between the inner panel and the board of the furniture. On the one hand, the furniture is broken by water, and the formaldehyde in the material can not be fully blocked, which causes the furniture to have a heavy formaldehyde smell.

Hardware is replaced

Replace cheap hardware and cut corners in furniture installation. For example, the counter mirror of a large closet has no back panel, no beading, and is only positioned with a nail. This practice of cutting corners and cutting materials can easily cause the mirror of the counter to be broken.