There are many ways to slice the veneer, each of which produces a unique special pattern. In technical veneers, we offer a variety of different shaving methods.
But we also patented and improved our outstanding production technology and machines. For example, we placed the backing plate on a special vacuum bed backboard table and safely fixed the backing plate with vacuum air. This technology not only greatly improved the other The manufacturer's conventional dog clamp application method also provides the utilization rate of each wood of our company and the exchange time of the backboard to ensure that the thickness is too thin.
This is just one of the advanced methods in our various production processes. There are two kinds of benefits for customers. First of all, you can believe that the quality of Brocade veneer has always been the best. Second, our preferential veneer price is beneficial to customers' profit. .
There are several very common veneer processing methods.
First, the rotary table type or the circumferential rotary cutting method
In the rotary cutting, a whole piece of logs is placed in the mold on the lathe and rotated according to the rotation of the blade. If the logs are not rolled, the rotary cutting or the peeling of a log can be carried out continuously. This is a very affordable The cut of the veneer produces a variety of textures based on the annual growth of the wood and the different layers of the fiber. The width of the veneered cut is so large that it can process a whole veneer. However, this kind of veneer The cut method produces some less symmetrical textures because of the discontinuity of the texture.
This method is used in many rare species, such as tree tumors and some unique species, such as bird's eyelids, globular Sapele, globular McGregor. In order to obtain continuous texture of veneer, we are in logs or A mark is placed on the tree of the tree. The width of the veneer produced by this method will gradually narrow as the blade approaches the center of the tree.
For logs that are not rotated and cut out of veneer, they will be cut in half, three and a half, four and a half or more.
Second, semi-circular cutting
For semi-circular cutting, half, three or four-cut logs, we fix it on the boring plate and then rotate it. This method increases the width of the veneer with radius machining. Semi-circular cutting In the past, it was generally considered to speed up the production of veneers of different textures in a tree species. However, this method of cutting has often achieved some texture of flat cut veneers in the past.
Third, the flat cut method
In the flat cutting method, the most common phenomenon is the processing of high-grade veneer, two halves, three halves, and even four halves. Usually, the back plate is vacuumed on the lathe, and the tree core is far away from the blade. This method can be cut out. The same length of veneer. The flat cut method can make the veneer texture continuous, which is the standard texture of the veneer production (such as bamboo shoots or flaming), which symbolizes the flat cut method of cherry, ash, oak and other varieties. The veneer produced by this method can be continuously spliced ​​because of its texture, which is very suitable for the production of walls, door panels, and furniture.
Four or four cuts
In order to obtain a linear texture, the chopped veneer is usually the most recommended. Half of the four halves of the log are vacuumed on the lathe according to the verticality of the annual ring and the blade. The veneer cut out of the veneer is good, width It is narrower than the mountain and very easy to splicing. This cut must be used on large logs. But the oak cut from the quarter is because it avoids its characteristic tabby texture, also known as the tree striate.
Five or four rotation
Four-point rotary cutting is also a method of obtaining straight-grain veneer, but it can avoid the phenomenon of tabby in some tree species. Four-point rotary cutting is to rotate the cutting wood after fixing the log. The four-turned wood is in The angle of the cutting bed is fixed. With the rotation of the lathe, the blade cuts the straight veneer at a certain angle. The most common type of cut is oak. However, in order to take a larger width of veneer, other varieties The rotary cut method is maple, black walnut, and cherry. The texture is very straight, there are no bamboo shoots and other messy textures, straight lines are continuous and easy to splicing, which improves the verticality.
Name: Dongguan Zhongjie Wood Industry Operation Department Address: B1-12, International Furniture Material Market, Houjie Furniture Avenue, Dongguan
Telephone fax mobile phone - 13829080609
Contact: Miss Luo, Miss E-mail:
Enterprise website: http://
sample is available for plush dog house,plush pet house,wire pet house and etc.
welcome to discuss the details,we will give the professional suggestion and sent the sample for check the quality.
Dongyang Yadi Pet Product Co , Ltd was founded in 2006 and covers an area of 6500 square meters . We are located in Zhejiang , the famous manufacturing city in China.We are specialized in developing and manufacturing many kinds of pet products. Our featured products are pet collar ,PET Leash ,pet harness, pet clothes,pet bandana,small pet products,ect.
Our company also o ffer all kinds of OEM/ODM services.And enjoy a good reputation among clients,we can provide you with the highest quality products and services.
In order to take up the market , our company focuses on introducing and cultivating talents as well as constantly developing new products.We always take the principle of [credibility , concentrate on work , quality supreme , innovation and development", with a heart of thanks giving to return customers and society.
Welcome to visit our company!
Dog House,Plush Dog House,Plush Pet House,Wire Pet House
Dongyang Yadi Pet Product Co.,Ltd , http://www.dyyadipet.com