Many netizens will use CD-ROM drive when they are not reading the disk. This problem is caused by many reasons. What is the reason why the computer CD-ROM drive does not read the disk ? How to solve it? The following decoration home decoration network Xiaobian will give you an answer one by one, I hope to be helpful to everyone.
What is the reason why the computer optical drive does not read the disk?
The reason why the computer optical drive does not read the disk 1. The optical drive laser head is aging, and the data cannot be read.
Solution: You can increase the output power of the laser head. There is an adjustment screw behind the laser head holder. It can be rotated slowly by about 15 degrees. If it is not possible, then turn it 15 degrees and repeat the test until you can read the film.
The computer CD-ROM does not read the disk 2, the computer virus, the CD-ROM is maliciously blocked in the registry.
Solution: Is the binary value of "NoDrivers" in my computer HKEY_CURRENT_USER/Software/Microsoft/Windows/CurrentVrsion/Polices/xplorer the value of the CD-ROM drive. Normally there is no such item, you can also change the value to "00 00 00 00" (01 00 00 00 is A, 04 00 00 00 is C, FF FF FF FF is hidden for all drives). Note that some viruses now specifically change the registry, so that the drive letter is lost, some viruses will not make the drive letter lost, but will prohibit the CD-ROM drive to read the disk, what kind of CD can not read, but can start with the CD.
The reason why the computer optical drive does not read the disk 3, the laser head has too much dust, which makes the reading ability worse.
Solution: If you will do the following, remove the optical drive, open it, wipe the laser head with a cotton ball, absolute alcohol or distilled water (smooth cleaning, do not rub the ring. Do not use detergent - it will form a film ), dry for twenty minutes, then reload. You can make the CD drive work for you for a while. Ordinary users do not have the ability to do it. It may be difficult to recover after dismantling. It is recommended to buy a disc that is used to clean the bald head. Generally, the place where the disc is sold is bought.
The reason why the computer optical drive does not read the disk 4, long-term use, the drive mechanism of the optical drive, the lack of lubrication of the moving components, so that the speed becomes low or does not turn at all.
Solution: It may be that the laser seat slide shaft is not oiled or stuck. Clean the metal shaft and add some oil. After you put it in the disc, pay attention to whether there is a rotating sound, or there are other abnormal sounds, you can judge.
The reason why the computer CD-ROM drive does not read the disk is 5. The driver of the CD-ROM drive is installed correctly. Or its driver is corrupted.
Solution: Usually the drive of the CD-ROM drive comes in WINDOWS, no need to add it. If the driver of the CD-ROM drive is not installed with its own driver, the CD-ROM drive will also be lost. This situation usually occurs by adding so-called "optimization", "acceleration procedures" or other programs. At this time, you can enter the safe mode, delete the "CDROM" option in "Device Manager", and then restart the computer, let the system discover the new hardware and reinstall the driver of the CD-ROM drive.
The reason why the computer CD-ROM does not read the disk 6. Many pirated DVD discs can't be read by the computer's DVD drive. The quality of the disc is too bad. The performance of my newly purchased brand CD-ROM drive is not good. This situation usually occurs on the newly purchased assembly computer or the newly purchased CD-ROM drive. When reading the disk, there is a huge "click" sound. After troubleshooting the CD-ROM drive, it is very likely There is a problem with the power supply. It is necessary to take a break and check it.
The above is what Xiaobian brought to you. What is the reason why the computer optical drive does not read the disk? How to solve it? I believe that everyone has a basic understanding of the computer CD-ROM after reading this article. If you want to know more about decoration consultation, please click to enter the decoration knowledge channel.
More related wonderful reading:
What is the reason for the computer flower screen? What should I do with the computer screen?
How to format the computer? Computer formatting steps
How is the computer power supply calculated? Computer power calculation method
What brand of computer power is good? Which computer power brand is better?
How to reinstall the computer system? Computer system reloading steps
Patio dining chair set featuring full-scale comfort, you can stack and store, you can set up instantly for guests. The sturdy chairs are woven with all-weather PE rattan fibers that is hand weaving one by one, very beautiful, and stack for convenient storage.
Patio dining chair set has many options: armchair and armless chair, you can decorate different round, square or rectangle dining table. You can be free collocation by yourself.
About us:
1.our factory is more than 20000 square meter big.
2. Our showroom is about 800 square meters.
3. we have professional sale team and more than 200 workers.
4. The capacity of our factory is 60 containers/month.
5. we attended CIFF furniture fair and canton fair.
Welcome your inquiry for further discussion.
Dining Patio Chair Set,Rattan Dining Chair Set,Wicker Dining Chair Set,Outdoor Dining Chair Set
Golden Eagle Outdoor Furniture Co., LTD. , https://www.gerattan.com