In our usual life, more or less homes will have home appliances and items that are often used in daily life will be broken due to improper use or long-term use, especially for us every day. The toilet cover often has such problems. Next, I will tell you about the circumstances under which you need to repair the toilet cover and how to repair the toilet cover for your reference.
1. Under what circumstances does the toilet cover need to be repaired?
1. Insufficient flushing or falling into foreign objects or aging will cause the toilet to clog. If it is a soft object, use a simple dredge tool can generally be solved. If it is a hard object, it is generally necessary to open the toilet to clear it. The sewer dredging master handles it, and it is recommended that during the daily use of the smart toilet, try not to let foreign objects fall into the toilet and develop good habits.
2, the toilet tank accessories aging or damage failure, there will be water leakage, and the toilet leakage can not only ensure the clean and comfortable bathroom space, but also relatively waste, and the toilet leakage is generally floating or the water seal cover problems, only need to check out Replace the relevant accessories.
3. If the automatic heating function of the smart toilet is invalid, or the water temperature does not match the temperature of the adjustment, you need to check the remote control, water tank heating tube, water temperature sensor, thermal fuse and computer board, etc. to see which accessories are in trouble. Look at the remote control temperature setting is normal temperature, wait for 10 minutes after the temperature is set, if there is no heat, please unplug the measuring tank heating line resistance value is about 92 ohms, and then measure whether there are 92 at both ends of the heating tube Ohm left and right resistance, if not, the fuse is broken, and the resistance value (25K~80K) at both ends of the temperature sensor is normal. If it is normal, the computer board is broken. For example, if the water tank is changed, the detection is normal after changing. If the water is always heated, the computer board Bad to change together, this piece belongs to the professional replacement exercise, it is recommended to choose a regular maintenance master to replace it.
4. If the automatic hot air function of the smart toilet fails, it is necessary to check the drying device and the computer board, and measure whether there are 89+/-4 ohm resistors at both ends of the drying electric heating wire frame. If not, the drying device is broken. If yes, confirm After the seat is properly seated, press the dry button to measure whether there is 220V voltage at both ends of the heating wire frame socket. If there is no voltage, the computer board is broken. If the drying device is replaced, the computer board should be carefully checked. In the same way, it is necessary to be accompanied by professional maintenance personnel, and it is not possible to blindly replace the accessories.
Second, how to repair the toilet cover
1, the first method of repairing the toilet cover, find the screw cap, remove it with a live hand, and then replace it with a new one. Generally, the position of the screw cap is not easy to find, some are in the bright spot, and some are in the dark. In the dark, screw cap, open the cover on the side of the tank inside the toilet. Put it in your hand and touch it in the direction of the water tank. You should be able to touch it and see it is invisible.
2, the second method of repairing the toilet cover, when replacing the toilet cover, just remove the fixing bolt at the back of the toilet to replace it; when installing, reverse the operation. Most toilet covers are not sized, and it is enough to adjust the two bolts during installation. However, it is also necessary to measure the size, the screw hole distance, the width and length of the toilet cover, and then purchase a new toilet cover for replacement.
3, the third method of repairing the toilet cover, looking for professionals to change, in addition to the above two methods, Xiaobian recommended to find professionals to change. Some workers who change the toilet cover offer free replacement, but to use the products they provide, in fact, the slightly higher price of the product already includes their labor costs.
The above content is some of the relevant knowledge about the toilets that we often use in our daily life. I hope that you will be able to refer to the toilets in the future when you need to repair the toilet cover, and give you help. For more information on decoration, please continue to pay attention to our decoration home network.
Bed Base,Slatted Bed Base,Recliner Bed,Timber Bed Base
Foshan Aussie Hcl Furniture Co., Ltd. , https://www.hclexport.com