Any operator may cause tools when handling, moving, cleaning, checking or storing cutters, embossing tools, metal foil, sheet paper, punching tools, or even rollers, anvils or some other support rollers 1. The equipment is damaged and there are safety accidents such as casualties. This is not much related to the shape and texture of the tool (flat, rotating or flexible). In some extreme cases, some operators or tools seem to be born with "stroke damage", and are always more likely to be injured or injured than others.
It should be pointed out here that the tools used in the post-processing stage of web label printing are usually bulky, bulky and not easy to operate. At this time, the chance of tool damage or personal injury is much greater than other label processing Any stage. It's easy to say. Actually, in the manufacturing stage, in the warehouse, in the production or tool storage process, whether it is to move or handle these precision-processed tools, it is necessary to arrange well-trained personnel and full-time responsibility, especially in the printing of accidents. Post-processing stage. Therefore, it is recommended to strictly operate in accordance with all or part of the following requirements in the above areas and production processes:
Hard rotary cutters, embossing tools, metal foils, rollers and anvils are usually bulky and bulky, and are not easy to lift, move into or out of the production line, so special attention is required during operation to avoid tool damage and personal injury.
Flat cutters, rotating cutters or flexible cutters all have sharp blades, which may cause staff scratches if improperly operated; in addition, the cutters may damage the blades during movement, operation or adjustment.
When unpacking cutters or other tools, and when repackaging these items for storage and transportation, there may be safety accidents such as tool damage and personal injury if they are not handled properly.
Workers may use incorrect posture when placing tools, adjusting or cleaning equipment, or performing other operations on the post-press processing line.
If various objects, hand tools or wrenches are randomly placed on or around the printing machine's workbench, they may fall and mess up the working environment, which may cause damage to these tools or printing equipment.
Staff wear, such as work clothes (metal buttons, etc.), wearing jewelry (necklaces, watches, bracelets, etc.) will scratch, cut, and wear with these precision instruments during operation, installation, and starting operations of the machine In severe cases, the operator may be injured.
Carelessness in starting the machine, errors during operation or incorrect pressure settings can cause damage to the printing unit or processing tools.
If the maintenance methods of all kinds of processing tools are improper, lack of maintenance or storage conditions are not in compliance, the performance of these tools will deteriorate significantly after a period of time.
Since the printing work environment is different, there are many places that can be improved and improved. If accidents such as tool damage and personnel injuries occur frequently, it is necessary for the processor to improve the operation steps and storage methods of the processing tool and provide training for relevant staff.
The correct operation of various tools should not be regarded as a secondary issue by the enterprise. The correct use method and operation process of the tool, such as putting the tool into the printing machine, on the machine, and removing the printing machine are the keys to ensuring the production efficiency of the enterprise. This requires that the staff who perform the above operations must undergo professional training and strictly follow the operation instructions and procedures for orderly operation.
lower the cost
Many companies will ignore the training of employees, and may also regard employee training as a secondary issue in the establishment of printing processes. However, good storage environment, transportation habits and operation methods will help label printing companies reduce costs, increase production capacity, and create a safer and more ergonomic production environment.
Therefore, when the label printing plant produces and uses tools, some key elements need to be carefully considered and repeatedly emphasized:
In all transportation links, we must first ensure that the processing tools will not be damaged;
Reduce the possibility of processing tool damage as much as possible;
Use optimized operation steps, storage methods and use processes to reduce production time and cost;
For each processing tool, provide a convenient method of use
Reduce the lifting of any heavy objects;
Try to reduce the chance of various accidents.
In general, our goal is to make our working environment more comfortable through reasonable arrangement and orderly management, so that our staff can get more safety and reduce damage to various precision machining tools and production equipment risks of.
However, if you want to achieve the above goals, you must first improve the training process and warn staff of all possible hazards and dangers. In response to this, we will have a special discussion in the next column.
Copying is not to draw an extremely realistic picture, but to learn in the process of copying, why the color relationship in this place is like this, why this kind of physical structure is used here, and so on, we need to think about it. Using the copy table to copy, can make the copied works more intuitively displayed in front of you, light, color, space, body structure, material texture, etc., clearly feel the thickness change of each line of the work, the color gradient process, And then in the process of copying the analysis and understanding thoroughly.
A5 LED Light Pad,LED Light Box,Portable A5 Tracing Board Drawing Board
Guangdong Jishengke Industrial Co.,Ltd , https://www.jskpad.com