To install the floor in winter, pay attention to the three points of temperature.

In winter, the air is humid and the temperature difference is also large. The effect on the installation of the wooden floor is more or less affected. But as long as you grasp the points mentioned in this article, you can smoothly install the wooden floor in place.

After installing the floor, consumers generally think that they are done, but it is important to understand the follow-up of the floor installation. Let's take a look at what other items are needed by the owners and friends after the installation of the floor.

First, the humidity should be suitable

The normal use environment humidity of the floor should be above 40%, and the optimal humidity is 50% to 60%. Because the environment is too dry, it will also cause the dry floor to shrink in winter. Therefore, in the geothermal environment, reasonable adjustment of the humidity of the room is the most effective way to prevent floor deformation.

Second, the maintenance must be careful

When using multi-layer parquet to make geothermal, the thickness of the surface of the floor is 0.6 mm, and the surface compressive strength is relatively weak. If the stool legs in the room are not protected, when the person sits on the stool, the floor will be The surface is crushed.

Third, the temperature should be controlled

Before the floor is installed, the geothermal system should be pressure tested to prevent damage to the floor due to geothermal pipeline leakage. The water supply temperature of the geothermal system should not exceed 60 °C. In the initial stage of geothermal heating, the temperature rise should be gentle. The water supply temperature should be controlled at about 10 °C higher than the ambient temperature at that time, and should not be higher than 32 °C; and should be operated continuously for 48 hours; The water temperature rises by 3 °C every 24 hours until the designed water supply temperature is reached; the ground temperature directly contacting the floor cannot be higher than 42 °C.

Group 0+

Car Seat for Baby, new born baby car seat, infant car seat, baby car safety seats, car seat for little baby

NINGBO BABY FIRST BABY PRODUCTS CO.,LTD. , https://www.nbbabyfirst.com

Posted on