Tip: How to eliminate axial displacement

The axial displacement, also called the string axis, is the displacement along the axis. The total displacement may not be on this axis. We can decompose the displacement orthogonally in both the parallel and vertical directions. The displacement in the direction of the parallel axis is the axial displacement. The axial displacement reflects the relative position of the rotating part and the stationary part of the turbine, and the axial displacement changes, which is also the change of the axial relative position of the stator and the rotor. In the fully cold state, the thrust pad of the rotor is generally pressed against the thrust dam to zero. To the generator is positive, and vice versa, the distance that the turbine rotor moves in the axial direction is called axial displacement.

Influence displacement factor

1). Load changes.

2). The scale of the blade is serious.

3). Steam temperature changes.

4). Steam flow changes.

5). The high pressure shaft seal leaks large steam, which affects the rise of the housing temperature.

6). Frequency change.

7). The blade is broken during operation.

8). Water impact.

9). The thrust bearing bush is worn or damaged.

10). Extraction steam is stopped, axial thrust changes.

11). Generator rotor is turbulent.

12). High pressure steam seal steam pressure adjustment changes.

13). Vacuum changes.

14). The electric shaft displacement table is affected by the change of frequency and voltage.

15). The hydraulic shaft displacement meter is affected by the oil pressure at the outlet of the main oil pump and the change of oil temperature.

How to eliminate

If the axial displacement is too large during the operation of the unit, the load will be reduced, which will reduce the axial displacement.

After the unit is stopped, the jack should be used to check the cause of the axial displacement of the rotor. For example, if the thrust clearance of the thrust pad is too large, the bearing is poorly positioned, and the cause is found and eliminated. There is also a problem in the measurement loop that checks the axial displacement.

Stainless Steel 304 Stockpot

Wide Stock Pot,Stainless Steel Stock Pot Set,Best Stainless Steel Stock Pot,Commercial Stock Pots Stainless Steel

SUZHOU JIAYI KITCHENWARE TECHNOLOGY CO.,LTD , https://www.jiayikitchenwares.com

Posted on