[ Chinese wardrobe network ] Nowadays, people's lives are more and more focused on taste, and all kinds of wardrobes on the world can bring fashion and freshness to the interior. The Siniman Wardrobe is one of the founding brands of custom-made wardrobes in China. It is centered on wardrobes and is extended to custom closets, cloakrooms, fashion bookcases, TV cabinets, wine cabinets, etc. It customizes the personalization of the home and the convenience of the program is popular among consumers. Today, Xiaobian will give you a brief introduction to the main accessories of the Siniman wardrobe and the specific installation steps.
The main accessories of the Siniman wardrobe:
There are rotating clothes hanging, push-pull mirrors, lattice racks, pants racks, tie grids, etc. The wardrobe accessories can not only reflect the design inspiration of the wardrobe, but also meet the needs of customers. It is the soul of the whole wardrobe .
1. Trousers rack: The stacked pants will have creases, while the trousers racks will not leave creases in the trousers. It requires no less than 600mm of hanging space, so the trousers rack will usually be placed under the drawer, so Can save space.
2, pull plate: stacked woolen clothing code put together to find it will be very troublesome, if you use the pull plate can make the stacked clothes well, but it also has the disadvantage of less storage space, so customers should choose carefully .
3, each successful man will have a number of ties, these words are lined up in a non-tie box. This tie box takes up less space than a drawer, so you can arrange the position of the tie box at will by seeing the pins. Your socks, shorts, scarves and other small items have a home.
4, push-pull mirror: the wardrobe must have a face dressing mirror, the overall wardrobe design of the dressing mirror hidden in the closet, a light pull can appear, push back the dressing mirror tightly next to the cabinet board, no occupation of the wardrobe Inside space, a small mirror makes you radiant.
The specific installation steps of the Siniman wardrobe:
1. Use a mat to place the floor. Start by assembling the wide side panel against the end of the wall. Place the wide side panel on the ground (maintain 700mm away from the rear wall). First, put the plate of the filled three-in-one rubber plug on the cloth, check the hole spacing and the drawing, and install the three-in-one single-link. Then the solid layer is nailed to the cork, fixed on the wide side plate, the top handle with the large handle hole facing upward, the other solid layers are facing downward, and the foot line large handle hole is facing inward (the middle solid layer is consistent with the L frame height, that is, the bottom plate to the solid layer The inner space is 960mm, and the hole is drilled on site.)
2, nail back board. Place the assembled whole cabinet on the floor of the point cloth, and lay the side panels in the same plane. Use a slider to measure the diagonal size of the cabinet and adjust it to the same level. Start with the first backing plate from the wide measuring board. Note that if there is a solid nail in the middle, draw the center line of the solid layer with a pencil and nail it. nail.
3. Installation of the L frame. Use the side plates of the L frame to have a parallel line on the corresponding side plates, then move the center line of the three-in-one rubber particles up by 9 mm, and draw a parallel line on the corresponding bottom plate with the top frame of the L frame. The inner center 9mm draws the center line of three rubber pieces. The hole was drilled with a 10 mm drill bit and the hole depth was 10-20 mm.
4. Installation of push-pull mirrors. The three-section rail is mounted on the push-pull mirror, and the height of the push-pull mirror is generally 1700 mm above the bottom solid layer (customer can request height). The rail transverse line is drawn on the side panel at a height of 90° according to the required height.
5, the installation of Yitong. Move the 38mm draw cross-cut line from the ground level, the side plate is divided into the vertical cut line, and the cross pad is the center position of the first eye above the clothes pass.
The above is the main accessories and specific installation steps of the Shi Nieman wardrobe that Xiaobian has compiled for you. It should be noted that inspection work must be done before installation, paying attention to the protection of the product assembly. When installing, it is necessary to communicate with the installer in a timely manner to ensure that the wardrobe is installed properly. Once installed, you must check it yourself to make sure there are no installation errors. The most important thing is that after the installation, the whole bedroom must be neat and tidy, so as to reflect the taste of the owner.
Box Products,Paper Mache Boxes,Paper Box Packaging,Paper Take Out Boxes
Ningbo DSS Intelligent Technology Co., Ltd , https://www.dssking.com