The constant temperature thawing device is based on the principle of frozen plasma thawing box, and adds the film bag made of medical PVC film. When thawing, the plasma is separated from the water to achieve the purpose of dry thawing, and the traditional water temperature box type direct wet immersion is changed. Thaw method. This product not only keeps the outer and dryness of the plasma bag intact, but also prevents contamination of the water source, and also reduces the chance of cross infection in the hospital. It can reduce the waste of blood resources caused by the rupture of the plasma bag.
ã€Installation Notes】
There is no special requirement for the installation of the constant temperature defrosting device. Open the packing box, take out the machine, and place it smoothly. (The vertical machine should lock the moving wheel)
The instrument is energized and ready to work: prepare a bucket of water, connect the gifted silicone tube to the water inlet, and put the other end of the water pipe into the bucket, connect the thin silicone tube to the water leakage port, and put the other end into the water tank. (Note: keep water in the bucket).
Turn on the power switch. At this time, because the water tank is empty and empty, the low water level light is on and the water pump is automatically started to fill the water tank. When the water tank is full, the upper water level light indicates that the water is full, the water pump stops working, then the circulation pump is turned on, the liquid leakage is set, the working time is set, and the machine is automatically operated by clicking the running machine.
[Maintenance method]
1. When the constant temperature defrosting device is running, you can open the water-proof membrane bag to observe the water pollution. Determine whether you need to change the water according to the quality of the water. If you use pure water, it will delay the time for you to change the water.
2. When the water in the water tank is disinfected, a 0.5/100 chlorine sheet can be placed from the water inlet.
3. When the water tank is cleaned, there is a water discharge port on the right side of the equipment. You will let all the water in the water tank be drained, then close the drain valve, add water from the water inlet and add 2 pieces of disinfectant (chlorine) to start the equipment for 10 minutes. After the precipitation for 20 minutes, the water is allowed to drain, and the above steps can be repeated twice.
For more details, please contact Shanghai Qiaoyue Factory! We will be happy to help you!
Hair Trimmer,Professional Electric Hair Trimmer,Electric Hair Clippers Tools,Quickly Clean Hair Trimmer
ZHEJIANG SHENGFA ELECTRIC APPLIAMNCES CO.,LTD , https://www.sfelectricappliances.com