Replacement of toilet paper cutter blades

When the cutting force of the toilet paper cutter is increased and the cutting sound changes significantly, it means that the blade has been used bluntly, and the sharpening should be promptly replaced.

Replacement steps:

1. When the toilet paper cutter blade is in the top position, turn off the power switch, stop the machine movement, put the machine in a shutdown state, place the machine in a rolling state, and turn the machine in a neutral position. When replacing the blade, loosen all the screws of the knife bed fastening blade, insert the attached knife wrench into the hexagon hole of the knife bed, and rotate counterclockwise, the blade will fall automatically, and the screw with the knife handle will be loaded into the blade. In the screw hole, holding the knife handle, the blade can be removed from the hook and placed on the attachment holder, and the insert can be put into the cassette for grinding.

2. Fixation of toilet paper cutter blade: firstly check the newly taken blade, check the angle and width of blade sharpening, and wipe the blade with a soft cloth (rub the blade from the back to the edge of the blade. Do not rub against the blade or wipe it against the blade.) Then attach the attached tool holder wrench into the sharpened or replaced blade screw hole, place it on the attachment, push it near the knife bed, lift the blade and hang the two holes of the middle groove of the blade on the tool bed. On the extended hook, remove the knife handle, insert the knife wrench into the hexagonal hole of the knife bed, rotate clockwise, the blade will automatically rise to a fixed position. Tighten all the bolts securing the blade on the knife bed. Note that the entire process must be careful not to touch the blade with anything hard. Finally put away all kinds of tools, that is to complete the blade fixed.