In the process of using the Kvaser Memorator recorder, you will often encounter some possible problems. This article will describe the use of Kvaser Memorator and the possible problems from the following aspects.
The hardware used in this article is Kvaser Memorator Pro 5xHS, serial number 00778-9;
The configuration software is Kvaser Memorator Config Tool, version V5.11.879.
1. About the choice of new and old version configuration software
The old version of Kvaser Memorator (blue and white), to use the old version of Kvaser Memorator Config Tool, version model is V4.9.164.
The new version of Kvaser Memorator (pure black), to use the new version of Kvaser Memorator Config Tool, version model is V5.11.879.
Note: Kvaser Memorator Config Tool can be downloaded from Kvaser official website https: //.
Second, the recorder is connected to the computer
First connect the recorder to the computer through the USB interface. After successfully connecting to the computer, the recorder PWR light is green and always on.
1. Open Kvaser Memorator Config Tool-> Kvaser Memorator Pro 5xHS in the start menu;
2. Connect the recorder (Connect> Next-> Finish);
3. The state after successful connection;
After the connection is successful, the PWR lamp and CAN communication lamp of the recorder flash alternately.
4. View device information;
If the PWR light or CAN communication light is abnormal, you can click Flash LEDs to make the LED flash quickly and check whether the LED is damaged.
Third, the recorder CAN channel configuration
1. Display CAN channel configuration information;
2. CAN channel setting;
3. Add Databases in Log Configuration;
4. After the addition is complete, the database information is displayed;
Four, download configuration
1. After the configuration is completed, download the configuration to the recorder;
2. The configuration download is successful;
3. Check the configuration;
4. Configuration result;
V. Inspection process of recorder
Recorder inspection can be divided into two aspects: (1) as a CAN card for communication (2) as a recorder to record and store data.
5.1 Communication as CAN card
When communicating as a CAN card, connect the recorder to another CAN card with D-SUB9 (pins 2 and 7).
Note: 120 ohm termination resistance should be added in the middle.
1. Open the CANKing software separately, configure the use channel and the same baud rate;
2. Go On Bus;
3. Send and receive data;
The recorder sends data, another CAN card receives;
The CAN card sends data, and the recorder serves as the receiving end to receive the data;
If the transceiver is normal, the recorder can be used normally as a CAN card.
5.2 Use as a recorder
When used as a recorder, the steps are as follows:
1. First, configure the recorder channel;
2. Download the configuration to the recorder;
3. Click Disconnect to disconnect the recorder and disconnect the USB connection of the recorder;
4. Connect the 9-40 pin of CAN1 channel to 8-40V voltage for external power supply, and the 3 pin to GND;
5. Use CAN # 1-5 to communicate with another CAN card by adding 120 ohm terminal resistance between the 2 and 7 pins of D-SUB9, and the data will be stored in the SD card
6. After the data recording is completed, disconnect the external power supply and reconnect the recorder to the computer via USB;
7. Extract files: FlashDisk-> LogFiles extract files;
Six, FlashDisk disk management
1. Display disk usage and remaining space;
2. If you encounter disk problems, try to initialize the disk to view the problem;
3. Check the disk error;
4. Successful inspection;
For those who run a business in the catering and reatsurant industry, serving trays are of great importance. There are different uses for serving trays including carrying food and beverages from one place to another as well as enabling those in the industry to serve specific sized portions of food. Some serving trays are used to hold plates and drinks, while other restaurants choose the tray to serve food on. for sure; serving trays are an important part of the food industry.
When choosing serving trays for restaurant and catering businesses there are a lot of aspects to take into consideration. First, you will need to make a choice of the color and size of the trays. You can buy serving trays in many different sizes, ensuring that every establishment} can use the trays that are most appropriate for their business needs. When trays are used to be carried through walkways, they must be small enough to fit comfortably through doorways. If they are too big, waiters will find that it is difficult to transport food with these trays and the chance of spills and accidents will increase. The task that is being accomplished will best determine the type of serving tray that is going to be used.
Serving trays should in some cases be nice looking and provide a visual addition to the food that is being served on the tray. Additionally, many restaurants consider the design or shape of the tables when making their serving tray selections. This can be very important when placing the trays on the table. Ensuring that the trays make a good looking presentation for each meal is vital to a restaurant's success.
Wooden Serving Tray,Serving Tray With Handles,Wood Tray Supplier,Wood Serving Tray,Solid Wood Tray,Serving Tray
Jinan Tri-Tiger Technology Development Co., Ltd , https://www.tritigerwooden.com