[ Zhonghua Wardrobe ] Customized wardrobe is a kind of custom furniture, also known as the whole wardrobe / wall-mounted wardrobe / cloakroom, etc. Today, the website will tell you the custom-made wardrobe plate classification and plate custom wardrobe plate purchase.
1, solid wood particle board (particle board)
It is a wood-based material made of wood or other lignocellulosic material. It is a synthetic board that is glued under the action of heat and pressure. It is a board produced by the particleboard process, which is a kind of homogenized particle board.
The solid wood particle board has the advantages of superior environmental performance, strong decorative performance, non-deformation of warpage, strong nail holding force and good processing performance.
2, MDF (medium density fiberboard)
MDF is a type of MDF, including long-fiber boards and short-fiber boards. An artificial board made of wood fiber or other vegetable fiber, which is crushed, separated by fiber, dried, and then urea-formaldehyde resin or other suitable adhesive is applied, and then hot pressed. The density is generally in the range of 0.5 to 0.8 g/cm 3 and the thickness is generally 3 to 30 mm.
The fiber structure of the sheet is uniform, and the bonding strength between the fibers is high, so its static bending strength, plane tensile strength, and elastic modulus are good, but the holding screw force is weaker than the particle board.
3, the fragrant board
Hexiang board is made of crop straw and straw as the main raw material. It is made of MDI glue and functional additive. It is made of high temperature and high pressure. It is not only smooth and smooth, the structure is even and symmetrical, the board surface is solid, and it has good dimensional stability and high strength. It is environmentally friendly, flame retardant and weather resistant. It also has excellent processing properties and surface decoration properties. It is suitable for various surface decoration treatments and mechanical processing, especially for profiled edge processing. Can be widely used to replace wood-based panels and natural wood. It has the advantages of environmental protection and no release of formaldehyde, but the price is higher.
Plate custom wardrobe plate purchase:
1, look at the veneer
Some wardrobes look good on the surface. In fact, with a finger stroke, you can draw obvious scratches. These wardrobes are made of surface-coated vellum paper and ornate paper sheets that are often used in low-cost wardrobes on the market, and have poor wear resistance. Professional manufacturers use environmentally friendly melamine veneers with thicker immersion paint and high temperature and high pressure treatment. The surface strength is high, abrasion resistance and scratch resistance. Consumers also need to check whether the edge banding is flat and the seams are tight and so on.
2, look at the edge of the board
The edge banding of the board is a problem that most customers tend to ignore when purchasing a wardrobe. In fact, the edge banding of panel furniture is very important. It shoulders the mission of protecting the edges, waterproofing, releasing harmful gases and reducing deformation. Whether it is a wardrobe or a cabinet door, health is the most important.
Professional manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. A good edge banding should ensure that the edge band is tightly integrated with the end face of the plate, and that the joint between the edge band and the other faces must not have the defects of bottoming, chipping, and large gap, and the transition must be Natural, smooth and smooth.
After the edges are sealed, the water in the air is effectively prevented from intruding into the interior of the board. Some manufacturers have no professional equipment, rough cutting, and obvious edge collapse around them. Some even cut corners and cut only the front side of the board. The unsealed surface easily absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting the service life.
3, see hardware accessories
The hardware accessories of the wardrobe generally refer to: metal fittings such as drawer guides, door hinges/hinge. Nowadays, most of the custom wardrobe brands have multiple brands of hardware accessories for consumers to choose from. The more popular brands are: Hettich, Blum, DTC or brand-produced hardware. In addition to looking at the brand reputation, you should also experience the test on the spot, carefully check the workmanship to see if the push and pull is smooth and the bearing capacity is good. Accessories are an important element of wardrobes, bookcases and sliding doors, and are important indicators for ensuring the comfort and durability of household products.
4, see personalized customization
The overall wardrobe is becoming more and more popular. The reason is that because of its individuality, including the ruler, style and functional accessories of the wardrobe, it can be customized according to the needs of consumers. Choose the style, the designer can measure the size on the spot and give The effect picture, the function space in the custom cabinet, the rich storage accessories are available for selection, the movable wardrobe layer can adjust the size of the size as needed, the clothes pass can be detached, and the DIY of the storage can be fully realized.
The characteristics of these overall custom wardrobes are all consumers need to consider when purchasing, which are interchangeable and customizable, and whether the laminates and clothing passes are detachable, all need to be clearly understood in the store.
We are leading manufacturer for tattoo power supply in China,brand owner of Hurricane tattoo power and Spark tattoo power.
Tattoo power supply is essential to the process of modern tattooing. The power supply
determines the speed of the needle moving through the gun and allows the tattoo artist to control the pace of
inking. Learning how to connect the various parts to the supply will assist you with beginning the process. Once
the parts are connected, you can experiment with speed settings and find a pace at which you are comfortable
performing. This will provide you background knowledge and experience for working as an apprentice with a
professional artist; do not attempt tattooing without professional training.
Tattoo Machine Power Supply, LCD Tattoo Power Supply, Digital Tattoo Power Supply, Tattoo Power Supply, Hurricane Power Supply
Amztatto Supply Co., Ltd. , https://www.amztatto.com