[ Chinese wardrobe network ] The prosperity of the economy brings us to improve the taste of life. The improvement of taste is not only reflected in daily life, but also in our dressing. Nowadays, there are so many clothes for each person in each season. The variety of styles is dazzling, and we have to have a suitable simple wardrobe to house. Then you know that it is not difficult to install a simple wardrobe? What are the steps?
Simple wardrobe installation preparation steps
Check the packaging. First of all, when receiving the goods, whether it is express or direct purchase, be sure to check whether the packaging is seriously damaged. If there is, it is likely that the steel pipe inside is also crushed. Such goods must not be signed and purchased. Check it out clearly.
Open the package, and then check whether the accessories inside are complete, there is a manual, check on the manual, if it is less, it is estimated that it can not be installed without loading, so the number of advances is clear, so as not to be wasted. Always wear gloves when installing, and be sure to read the instructions carefully.
How to install a simple wardrobe
First install the bottom one, take out the four-way joint with the bottom and the high, and connect the short tube in the middle. Install a four-way joint on each side, then install the tube on both sides, and decide the position to be placed. Install a long tube on one side and a short tube on the other. Then install the base fabric on both sides, and then install a three-way joint around each other.
After installing the bottom, insert six short steel pipes, then put the whole wardrobe cloth up against the surrounding holes. Then install a layer of the bottom plate and then put it on the six steel pipes.
If the wardrobe is divided on two sides, first install the short-side floor, first insert the side steel pipe, then install the cloth, then connect the four-way joint, then install two horizontal steel pipes, then install the cloth, then Then make up the four-way connector on both sides. Repeat the partition until it is attached to the top layer. After the short side partition is installed, the long side is a vertical hanging area, and a three-way joint is used to connect the two long tubes to the top.
After both sides are installed, connect them directly with long steel pipes, so that the wardrobe is installed. If the wardrobe is too high and not enough to squeeze, it is recommended to push the side back. When the top of the large set is at the top, it is best to pull the bottom to the top, so that there is space to pull on the top until the corners are installed diagonally. At this time, the cloth cover can be pulled down. The wardrobe is now installed.
Compared with the life we ​​used to live, we dare not think about it. For example, we don’t have any personal preferences, our own unique personality! Every year, there are new popular new weathervanes, but we can’t say To throw away your clothes everywhere, it is best to find a wardrobe to save, it is a bad behavior to waste luxury.
Felt Board,Aluminium Frame Board,Aluminum Composite Board,Aluminum Frame Notice Board
Dongguan Aoxing Audio Visual Equipment CO.,Ltd , https://www.aoxing-projectorscreen.com