The kitchen is the main part of the home improvement, but also a large part of the cost, so the kitchen decoration has become the focus of attention. The cabinet is an indispensable piece of furniture in the kitchen now. The good cabinet is not only convenient to use, but also more environmentally friendly and durable.
Strictly sealed cabinet panels not only make the cabinet look more beautiful, but also feel smoother, and can effectively control the release of formaldehyde in the board, making our kitchen more green. However, the edge banding is often not valued by consumers, and consumers who do not know how to do it will be sloppy. The cabinet body and the edge band are closely attached and the sealing performance is good, which can effectively reduce the release of formaldehyde. But the edge-sealing technology is not good, how should we identify it?
"The quality of the edge banding can be felt by touching it."
The sealing edge of high-quality cabinets is delicate, smooth and feels good. The inferior edge sealing is just the opposite. Some edge strips are more fragile, one fold will break, and the toughness edge strips are not easy to break, and can also reduce the release of formaldehyde. .
Here are some simple ways to identify the quality of the edge band:
1, look at the color, the general color is bright, the surface finish is relatively better, the darker the color, such as black, gray, etc., the possibility of using the return material is relatively large;
2, smell there is no taste, the use of good quality raw materials produced products generally taste small, if the taste is too large, it means that the quality of the raw materials used in production is relatively poor;
3, pick up a margin of the edge of the edge, the less easy to break the better the quality, the reason is that there is less calcium carbonate added, so the product toughness and strength is better.
Extended reading: edge banding maintenance of veneer furniture
The importance of edge banding on kitchen cabinets
1. It can effectively prevent the release of formaldehyde from the board;
2, to prevent moisture intrusion;
3. Reinforce the board.
Conventional edge-sealing techniques are mostly associated with hot melt adhesives, which are applied to a substrate or edge banding and then bonded through a pressure zone. This not only requires longer processing time, causes greater loss, and is more likely to contaminate the workpiece and the workpiece, and the seam of the processed product is more likely to be contaminated. So is there any way to improve this situation?
"Invisible edge banding"
In the big environment of intelligent manufacturing, intelligent production will replace artificial. Now the new edge banding machine can not only complete the fully automatic edge sealing processing, but also greatly save the artificial capital investment in production, and the processed products are better than the traditional edge sealing, which is called “invisible edge sealingâ€. It is an edge banding machine for air force hot air system based on the principle of convection physics. By using a compressed hot air system, the edges of the edge band can be perfectly bonded to the plate, and the water resistance, heat resistance and long-lasting coating are guaranteed. Installed.
The Air force system enables companies to take full advantage of their sustainability advantages through their outstanding line of invisible glue line laser edge banding. Compressed air is sprayed from a special nozzle at a very high temperature and sprayed directly onto the reaction layer of the laser edge banding, thereby activating the reaction layer and firmly bonding the edge band to the workpiece.
Even if some of the panels are completely edged, the instrument with low precision will cause chipping between the edge strip and the cabinet, and the chipping will also cause formaldehyde to be released. Edge sealing belongs to the production process and is an important factor in determining whether the cabinet is environmentally friendly. The key to the production process depends on the machinery and equipment, and the equipment directly determines the precision of the edge sealing.
(Original title: the purchase of cabinets, the edge can not be ignored!)
Metal lockers, or more specifically cold-rolled steel lockers, are secure storage devices for indoor dry environments. They`re durable, efficient, and economical.
Here you will find lockers for school, staff, sports, parcel delivery.
You can choose from single, double and triple tier lockers, as well as box lockers.
Choose from gray, tan, or blue powder-coated for your lockers, or colors per Ral No.
There are combination locks, padlocks, key locks (including cylinder locks) lever or knob locks, electronic key pads, or other electronic or wireless locks to choose.
As a metal storage manufacturer, Shidiu Import & Export Co.,Ltd. are always striving to serve you with the most steady quality and best prices.
Metal Locker Cabinet, Full Locker, Metal Lockers for Sale
LUOYANG SHIDIU IMPORT AND EXPORT CO., LTD , https://www.ybshidiu.com