Feihong brand ZKD-C self-programming computer ringing music time signal manual 05
1. Usage and performance
The factory has accumulated more than ten years of bell ringer production experience and has been updated for more than ten years. The latest single-chip low-power, high-performance special-purpose microcomputer time-control chip of Philips is adopted for the latest use of selected high-quality imported components. Schools, institutions, factories and mines realize automatic work and rest ringing, and can also use tweeters to send electronic music instructions to start and stop classes.
Second, the main technical indicators
1. A maximum of 64 ringings can be performed per day, and the program will not be lost for 100 years; a 24-hour cycle.
2. 3 working modes (play on Saturdays and Sundays or not).
3. Ringing can output 16-second continuous ringing and 8-second ringing to distinguish between preparatory bell and class bell.
4. Program automatic check and modify function (fast display of the set time point, free to add, delete or modify settings).
5. AC and DC dual-use, built-in 9 No. 1 dry batteries, the horn can be sounded in case of power failure, (dual audio or music sound), the built-in amplifier power of the machine is 20W, and it will be replaced once in March (the battery may not be installed in areas without power failure)
6. Built-in rechargeable battery, automatic charging, the program and time are not affected by power outage (never replace, avoiding the problems of ringing, damage and other problems caused by the battery running out of leakage).
7. Digital display, luminous indication, and touch button operation, it will be seen at a glance.
8. Travel time accuracy: Daily error is less than 1 second. 9. The bell load is less than 600W.
10. Externally controlled speakers 8-16Ω, 5-25W. 11. Power supply voltage: AC 220V, DC 12V-15V.
Third, the programming method
1. Clear all: Press and hold the "Save / Clear" key for more than 3 seconds in the programming state to make the display go out once, and all the information will be cleared.
2. Status switching: Press the "function" key to switch between five statuses: running, clock, programming, week, and mode (corresponding status light is on).
3. Temporary ringing: press the "ring / check" button.
4. Ringing programming: switch to the programming state, press "tune (+,-)" to adjust to the time you want to ring, and press the "save / clear" key to make the signal light on or flash to save (the light on means that the time is continuous After ringing for 16 seconds, the light flashes to indicate that the ringing is interrupted for 8 seconds at this time, and the light is off for clearing. Press the "Save / Clear" key 1-3 to convert and store these three kinds of information. Deposit at the next time,,,,,, and so on (time deposit can be in any order). Note that the programming time and running time are two independent times.
Example: Need to ring for 6 seconds continuously at 6:00 every day, 8 seconds for 6:45 intermittent ringing, the programming method is: adjust to 6:00 in the programming state, press the "Save / Clear" button to make the light on, then adjust At 6:45, press the "Save / Clear" button twice to make the light flash.
Note: The time adjustment method is: every time you press to adjust 1 minute, press and hold to turn to fast adjustment.
5. Program check: After the time is entered, press the “Beep / Check†key in the programming state, the time will quickly jump to the set time of the road to stop and light or flash the signal light (the light or flashing light can be judged What kind of information is the time)? One is displayed every time you press it. If you press and hold the "Beep / Check" key, it will stay for 0.5 seconds at each set time. If errors are found, add or clear them with "Save / Clear" (Note: When the time changes rapidly, you can press "Adjust (+,-)" to stop).
6. Align clock: switch to the "clock" state, press "adjust (+,-)" to align the time with standard time.
7. Align to the second position: In the "clock" state, press and hold the "ring / check" key to display the minute and second positions, press the key (-) to stop the second, press the key (+) to clear second.
8. Align to the week: switch to the week state (the number on the right shows "week"), press "+ (+) to adjust the number on the right to align the week.
9. Select the loudspeaker: switch to the weekday state, press the "Beep / Check" button to adjust the left digit to select O or H (0 is the loudspeaker for both power and power failure, suitable for users who only install the loudspeaker; H is for automatic conversion, power failure The horn sounds only afterwards, which is suitable for users who have installed bells and horns at the same time; users who have not installed horns are optional).
10. Sound selection: Press the key “-(-)†in weekday state to change the second letter (O means to select the speaker as music sound, C means to select the speaker as dual audio alarm sound).
11. Select the mode: switch to the mode state, press "tune (+,-)" to select the ringing mode (mode 1-5 is week 1 to week 5 ringing, do not ring on weekends; 1-6 is week 1 to week 6 Ring the bell, do not ring on Sunday; 1-7 ring the bell every day).
12. Automatic operation: After the above steps are completed in sequence, switch to the running state to work.
13. Reset: After the power failure, if the battery voltage is lower than 2V, it may freeze or not display after the call, please press the reset switch to recover.
4. Installation line
1. Automatically ring the bell, please use the school's original ordinary AC bell. Pay attention to safety when plugging and unplugging the bell.
2. For speaker installation, use copper core wires within 10 meters to connect the speaker directly, and cannot share the speaker with the amplifier.
3. Outside line test: Connect the two circular holes a and b on the output plug with a wire (note the safety), and the electric bell should ring. If the bell does not ring or the line is smoking, the wiring is incorrect.
Remember: Only after the bell connection test is normal can it be connected to the controller.
5. Product Warranty and Maintenance
1. Send the product warranty card and copy of the invoice to our factory. 2. Only the device fee is charged for the repaired products.
The factory strictly implements uniform prices, perfect after-sales service and sincere three-guarantee system. It is indeed due to quality problems that the package will be returned and replaced within three months, free repair within one year, and lifetime maintenance.
6. Business Contact
Mailing address: 5A-216 Xinbao Box Feihong Electrical Equipment Factory, No. 59 Jianshe Road, Chenghua District, Chengdu 610051
Contact: Fu Kelun
Tel: (028) 83242229 Mobile: (028) 89035102 (0) 13708057221 Fax: (028) 83288420
The machine is equipped with rechargeable battery and automatic charging circuit. When it is used for the first time or left unused for more than 10 days, the battery has no power and needs to be plugged in for more than 24 hours to charge. If the display screen is not bright, press the reset switch.
7. Safety warning:
1. Do not open the cover without unplugging the power plug and bell plug.
2. The instrument must be placed in a place with good ventilation and heat dissipation and no flammable materials around.
3. Unplug the power plug and bell plug for a long time (note that the bell plug is live) and take out the dry battery.
4. Read the instruction manual carefully before using the instrument and before troubleshooting. Unplug the power supply, bell plug and speaker during thunderstorms.
8. Abnormal fault handling
Fault phenomenon
Check item
Remarks
Click to enter Feihong Electrical Equipment Factory's booth in Chengdu Chenghua District to see more I want to contribute
Sweep, welcome attention
Official WeChat of Educational Equipment Procurement Network
Master the latest and most authoritative information in the education equipment industry
Copyright and Disclaimer:
â‘ The copyright of all works on this website that indicate "Source: China Education Equipment Purchasing Network" belongs to China Education Equipment Purchasing Network, and may not be reproduced, edited or used in other ways without authorization from this website. Works that have been authorized by this website should be used within the scope of authorization, and indicate "Source: China Education Equipment Purchase Network". Violators of this website will be held accountable for legal liabilities.
â‘¡ All works on this website that indicate "Source: XXX (non-this website)" are reproduced from other media. The purpose of this reprint is to transmit more information. This does not mean that this website agrees with its views and is responsible for its authenticity. Take direct responsibility and joint liability for infringement of such works. If other media, websites or individuals download and use it from this website, they must keep the "source of the manuscript" indicated on this website, and bear the legal responsibility of copyright and other.
â‘¢ If the content of the work, copyright and other issues are involved, please contact this website within two weeks from the date of publication of the work, otherwise it is deemed to waive the relevant rights.
About Website Contact Us Online Advertising Publication Member Service Beginner Member Agreement Site Map I want to contribute Site Recruitment
Customer Telephone E-mail: Address: Capital Institute of Physical Education, No. 11, North Third Ring West Road, Haidian District, Beijing
Beijing Public Security Bureau Haidian Branch Record No. 1101083696 Beijing ICP Certificate No. 050368 Beijing ICP No. 05038339 Business License
Copyright? 2004-2020 Beijing Tiandi Yitong Education Technology Co., Ltd. All rights reserved
var _hmt = _hmt || []; (function () {var hm = document.createElement ("script"); hm.src = "//hm.baidu.com/hm.js?7bba69eb3c3832c2e03cd64b565141fc"; var s = document .getElementsByTagName ("script") [0]; s.parentNode.insertBefore (hm, s);}) (); (function () {var bp = document.createElement ('script'); var curProtocol = window.location .protocol.split (':') [0]; if (curProtocol === 'https') {bp.src = 'https://zz.bdstatic.com/linksubmit/push.js';} else {bp .src = 'http://push.zhanzhang.baidu.com/push.js';} var s = document.getElementsByTagName ("script") [0]; s.parentNode.insertBefore (bp, s);}) ();
Hair care
private label hair care product ,30 years experience guangzhou cosmetics factory supply ,OEM/ODM service is welcomed .
Guangzhou Athena Cosmetics Manufacturing Co.,Ltd is a subsidiary of YALAN international group which is located in Guangzhou,china.it is the production center of YALAN international group branding products,specialized in the development and production if cosmetics.ATHENA is qualified for import and export.
controls the quality in full accordance with GMP, ISO9001 quality system good manufacturing practice for cosmetics and key points of cosmetic production licence inspection.
Hair Care Product,Anti-Loss Hair Shampoo,Smoothing Repiring Hair Conditioner
Athena(Guangzhou) Cosmetics Manufacturer Co., Ltd , https://www.ydgzathenaskincare.com