Electric Five Function ICU Bed

1. Manufacture, factory
2. CE, ISO9001, ISO13485 approval
3. European style
Various positions can be adjusted by hand controller (Figure1): One cranks use for back up lift, another crank use for knee lift.
6.2 Lower or up of the guardrail:
If your bed is equipped with aluminum alloy Guardrail:

1. Press the red button and lower the side rail. (Figure 2)
2. To secure, press the red button and pull the side rail up until you hear click.

6.3 Using method of I.V pole:
This kind of I.V. pole can be chosen or not according to the demand, it can be move away if no using.
Erect the I.V. pole when using. When the I.V. pole is upright, the height can be adjusted. When the height is not enough, rotate point of C and pull the pole B to be higher, and then clockwise point of C as locked, and put the infusion bag hang on the point A. (Figure 3)
Use is completed, fold up the I.V. pole, take the infusion bag away from the A's, rotate the point C to restore B to the lowest height and then clockwise rotation C fixed under B, take out of the I.V. pole from the hole.

6.4 Using method of casters:
Your bed is equipped with casters individually equipped with brakes, you can move the beds with/without patient on bed.
Note: Lock the casters when you stop the bed or locate the bed. (Figure 4)
Foot step on the down pedal to lock the caster; foot step on the up pedal to unlock the caster
Main Function as below:

1. Backrest:0~75°±5°;
2. Legrest:0~45°±5°;
3. Height adjustment:450~740mm;
4. Trendelenburg and reverse Trendelenburg 0~12°±2°.

Features:
1. High level on patient protection and safety factor
2. With bedsider Radiography and bed rollover function
3. Electric beds have the stability, flexibility and durability, suitable for a variety of clinical environments demand.
4. Afety weight loading ≥ 300kg, protection class reach IP54.
5. Bed height adjustment range 30-75cm, low clearance above ground, high security.
6. Bed board is divided into four parts, the angle of each part can be electric adjusted and scale displayed, knees bend posture angle up to 30º

 

Status Indicator ESD Tester

In the ESD Access Control, the Anti-static status indicator ESD tester is an important device to check from the source. status indicator ESD test host can detect whether the anti-static measures or equipment of each worker who enters the anti-static area is in place and qualified. That is to say, before the worker enters the work area, the RFID card access control system is used to confirm whether the worker can enter the work area, so as to avoid entering with a large amount of static electricity, which may cause product loss.

Anti-Static Status Indicator Esd Tester,Status Indicator Esd Test Host,Rfid Card Access Control System,Status Indicator Esd Tester

Guangdong Zecheng Intelligent Technology Co., Ltd , https://www.szzcsecurity.com