[ Chinese wardrobe net ] The furniture market is full of eyes. When purchasing wardrobes , all kinds of wardrobes are full of our eyes. Many people will buy wardrobes that satisfy them. Although there are many kinds of wardrobes, they are not necessarily suitable for them. Wardrobe, so many people choose custom wardrobes, then what are the matters needing attention when customizing the wardrobe?
One: profile
There are two types of practical profile substrates: one is aluminum alloy and the other is plastic steel. Due to its light weight and high strength, aluminum alloy is a high-grade material for sliding door substrates. Has gradually replaced plastic steel products. The aluminum alloy itself is divided into ordinary aluminum-magnesium alloy and smaller aluminum-magnesium alloy for special aviation. Because aluminum-magnesium-titanium-silicon alloy has higher strength and smaller weight. Therefore, it is favored by consumers, but the cost is several times that of ordinary aluminum-magnesium alloy. When looking at the profile, not only pay attention to the substrate, but also observe its surface treatment. Advanced surface treatments include anodizing, electrophoretic coating carbon coating, etc. These processes have higher hardness and aesthetics than simple spraying and plating. The electrophoretic coating used by KD in the United States has a film thickness of 20 microns and the adhesion reaches the international highest standard of 0, which has unparalleled scratch resistance.
Two: top and bottom rail
At the time, try to choose the top and bottom rails of the same material as one material, thinking that the top bottom rail is the load-bearing part. To withstand repeated friction, the top and bottom rails must have high strength and wear resistance. The top and bottom rails are made of aluminum-magnesium-titanium-silicon alloy with higher strength, strong resistance to deformation and longer service life.
Three: top bottom wheel
The top and bottom wheels are important accessories for sliding doors. It is necessary to pay attention to the selection of high-quality bearing pulleys. The outer part of the bottom wheel is made of FRP material, which has the characteristics of high strength, wear resistance and low noise. Using push-pull more than 100,000 times, the wheel body is treated with three-degree polishing and plating, never rusting.
Four: strip
The main materials popular in the market are PVC rubber, silica gel and the like. The silica gel strip is made of a non-toxic, non-corrosive silicone material. It also maintains good toughness at ultra-low temperatures, ensuring a flexible connection between the sheet and the profile.
Five: sheet, substrate
The common leeks used in cabinet plates are blockboard, MDF, and moisture-proof particleboard. Among them, the most cost-effective is the moisture-proof particle board, which has the advantages of light weight, high strength, strong nail holding power, etc., but the moisture-proof particle board also has different qualities.
Six: glue, edge banding, veneer
The edge banding mainly seals the section of the sheet. Achieve damage to the board from environmental or unfavourable factors in use (mainly moisture). Also achieve decorative effects. Ordinary glue has a pungent odor due to the presence of formaldehyde, and there is a risk of carcinogenicity. Therefore, when purchasing, pay attention to whether the cabinet has any odor.
I believe that through the above introduction, friends can choose the custom wardrobe design, no longer because of the design dissatisfaction, size is not suitable for the room type, or other problems are bothering you, I hope the above content can help you, and I hope everyone can Customize the wardrobe that will satisfy your family.
24/6 Staples,Office Binding 24/6 Office Staples Needles,Durable Quality 24/6 Office Staples Needles,Stainless Steel 23/10 Heavy Duty Staples
SHAOXING YIYOU STATIONERY CO.,LTD , https://www.yiyou-staple.com