Complete Turn-Key Bottled Drinking Bottle Water Process Treatment Plant Equipment

Complete turn-key Bottled Drinking bottle Water process treatment Plant equipment


DCGF series of Washing-filling-capping 3-in 1 machine

For filling carbonated drink contains washing, filling and capping
With complete automation, suitable for filling carbonated drink into polyester bottles And PET bottles. It can be used for all kinds of bottles. The bottleneck blocking makes The process of changing bottles easily by only adjusting the height of conveyor chain.
The filling process adopts the micro-pressure technology, Which makes filling process faster and more stable

Machine Features

1) Compact structure, good shape, easy operation, high automation degree and low labor Intensity

2) Adopts the technology of direct contact air conveyor and bottle inlet poking wheel, instead Of "feeding screw" and "conveyor"; Thus making it is easy to change the bottle shape.

3) Adopts bottle neck clamping technology which removes the need for changing the height Of the bottle; Just change the parts which are relevant to the bottle diameter, such as the are Guide plate and poking wheel

4) Special stainless steel bottle gripper of rinser does not touch the bottle screw part, thereby Avoiding secondary contamination

5) All parts directly contacting the media adopt food stage stainless steel, without dead Angles, so they can be cleaned easily

6) Diaphragm adjustment valve controls the inlet flow rate of liquids, and can keep the slight Turbulence of liquids level in the solution barrel and ensure accuracy in filling

7) Automatically closes feeding valve if there is no bottle on the machine, thus avoiding the Loss of aqueous feed.

8) Fills automatically with high speed and accurate control of liquid level.

9) High filling speed and mass flow rate, high precision of filling valve and control of liquids Level is accurate and without loss.

10) Equipped with perfect CIP control loop and program and cleaning devices on the spot

11) The "capping head" adopts a magnetic constant- Torque device to ensure high capping quality without damage

12) Adopts efficient cap settling system with perfect cap feeding and protection device

13) Adopts spiral descent fashion for the support plate for bottom of bottle at the outlet Thumb wheel, which removes the need for adjusting the input height for exchanging bottle Models

14) Equipped with perfect protection system to prevent overload, and protect facilities and Operators efficiently.

15) Applying touch screen, it fully realizes the man-Machine conversation whereas the status of device running is clear at a glance

16) The primary electric components such as touch screen, PLC and transducer all Adopt well known import products.

17) These air control components all adopt SMC products made in Japan. Sparkling water bottling machine
A Water bottle---Semi-auto blow molding machine- Two cavity- 3set
1 Blow molding machineTwo-cavity
2 Stove
3 High-pressure air compressor1.0/30kg
4 Cooling chilling dryer With filter30Kg
5 Low-pressure air compressor 1.6/10kg
6 Filter
7 Blow mould -2-cavity500ml
8 Blow mould 1000m
9 Blow mould1500ml

B Water treatment system

1 Raw water tankStainless steel
2 Booster water pumpNan fang
3 Silica sand filterStainless steel
4 Active carbon filterStainless steel
5 Sodium iron exchangerStainless steel
6 Iron re-generatorStainless steel
7 Precision filterDia-400mm Height: 1500mm
8 Buffer water tankStainless steel
9 1-grade RO With water pumpsize: 1000mm
10 Ozone sterilizerIt use o2 source
11 Finished water storing tankFor water line

C Water bottle washing-filling-capping 3-in-1 unit machine

1 automatic un-scrambler
2 Cap elevator
3 Rinsing-filling-capping 3-in-1 unit auto filling machine 32-32-10
4 8m air conveyor, 5m real bottle conveyor
5 Bottle type spare parts2bottle type

D Back treatment-labeling and wrapping process

1 Ink jet printerFrance-Imaje
2 Bottle brushing drying machineCG-1
3 Lamp checker PMJ
4 Auto sleeve labeling machine and shrinkage tunnel TG-S150
5 Bottle screw and label leading pole
6 Steam generator TG-T200
7 Air compressor
8 Auto PE film wrapping machine TG-350A
RO water purifier filter system for bottling water plant

Usage:

Reverse osmosis principle of work is as pure water and saline were ideal semipermeable membrane separated by a semipermeable membrane, it only allows water to pass through while preventing salt water side of the membrane by, the water will spontaneously through a semipermeable membrane into the saline side, this phenomenon is called osmosis, if compression forces in the membrane of the saline side, the water spontaneous flow will be inhibition and slow down, when the pressure reaches a certain value, the net flow of water through the membrane is equal to zero, the pressure is called the osmotic pressure exerted on the membrane, when the saline side pressure is greater than the osmotic pressure, water flow is reversed, the, saline in the water will flow into the pure water side, the phenomenon is water reverse osmosis (RO) processing. 

Component:
Item assembly
Stainless steel high pressure membrane crake
RO high pressure bump 2set, nanfang bump
All kind indicator, pressure indicator, electricity magnetism ,balance device and pipeline valve system
Online pressure auto protection device
Online electricity indicator (comply for stability)
System safe protection
And alarm system
System frame          

2.Silica Sand filter
   
 

3. Active carbonate filter  
 
4. Iron exchanger  

water treatemt system connection-silica sand filter-active carbonate filter-sodium iron exchanger-precision filter-RO

Package photos prepare to ship



After sale service

1. Welcome to consult us for offer and technical solution:

2. free design workshop layout as workshop space.

3. free check raw material quality report to match suit water treatment system.

4. Engineer install and train client how to use and maintain machine

5. one year guarantee

6. if some client urgently need machine, we can ship machine half month under supply caps and bottle samples to meet with client quick need.

Some basic details need buyer support:

1. bottle and cap samples

2. workshop space length and width size

3. source water quality report

4. capacity requirement, we will match solution as it. we have capacity from 1000bph to 24000bph

5. and other details need check

6. for more,can talk us 86-13739169728

We also supply Raw material required for filling line required:

preform&cap &label&PE film


preform different weight-

cap

preform and cap we guarantee 100%full new material, if have recycle material, will return all money

we have own label printing workshop, competive price: PET&PVC two kind material label, roll label and single slice label.

Contain loading :

Toner Cartridges for Canon Mono

308 Toner Cartridge,Toner Cartridge,708 Toner Cartridge

GS Green Tech Co., Ltd. , http://www.zhtonercartridge.com