1. The anodized aluminum is not hot stamping. There are many reasons for the hot stamping, and the disposal methods are also different. In summary, the following three are important.
â‘ When the hot stamping temperature is low or the pressure is light and the hot stamping is not stable, you can adjust the hot stamping temperature and pressure again.
â‘¡ In the printing process, the amount of dry oil added to the ink makes the ink layer nominally dry and blunt to produce crystallization, which makes the printed foil hot stamping. The solution is to first prevent the appearance of crystallization when printing, followed by For example, after the crystallization occurs, the light stabilizer can discard the hot stamping foil and press the printed product with air under the condition of heating to damage its crystallized layer before entering the hot stamping.
â‘¢ Participate in the appropriate waxy salt-removing agent, anti-sticking agent or non-drying oily materials in the ink, which will also cause hot stamping. The final measure is to stick a layer of receptivity on the printing plate. Press the strong paper with air pressure once, after attaching the amount of wax and non-drying oil on the top layer of Zhu, remove the hot stamping.
2. The graphics printed on the anodized aluminum are faint and the collar is faint
In the process of hot stamping, the failure to invent the graphics and text is faint and dizzy, mainly caused by the hot stamping temperature is too high, the anodized aluminum foil coking and other reasons. If the hot stamping temperature of the printing plate is too high, the anodized aluminum foil exceeds the limit that can be suffered At this time, the hot stamping and the anodized aluminum foil will expand around, causing dizziness and virtual phenomena.The temperature must be adjusted to a suitable scale according to the characteristics of the anodized aluminum foil.
For the coking of the anodized aluminum foil, it is mainly because the shutdown during the hot stamping process is too long, so that a certain part of the anodized aluminum foil takes a long time to interact with the electric heating and low temperature plate to produce a hot coking scene, and the picture will be dizzy after hot stamping. Therefore, if the machine is shut down during production, the temperature should be lowered, or the electrochemical aluminum foil should be removed.It can also lift a thick paper in front of the printing plate with a higher temperature to isolate the electrochemical aluminum foil from the printing plate.
3. The anodized aluminum writing is ambiguous and pasted.
The main cause of this failure is caused by too high hot stamping temperature, too thick anodized aluminum plating layer, too much stamping force, slack of anodized aluminum device, etc. It should be solved according to the detailed situation. Too high is the main reason for unclear handwriting and pasting. In the process of hot stamping of anodized aluminum, emulsifiers, if the printing plate has a high degree of warmth, cause the base layer and other film layers to transfer and stick, resulting in unclear and pasted writing. For hot stamping, the hot stamping temperature should be adjusted according to the practical range of the temperature of the anodized aluminum foil. In addition, the thicker anodized aluminum should be selected, the appropriate pressure should be adjusted, and the pressure of the pressure roller should be adjusted appropriately. Roller tension.
Pet Collars And Leashes
When the dog wears the collar, be careful not to be too tight, because if the collar is too tight when running and excited suddenly, it will cause damage to the dog. A suitable Pet Cooling Collar should be worn by the dog, and there should be room for the owner to put two fingers . As the dog gets older, the lung function will become weaker and weaker, and the chest-back leash is a good choice for older dogs. If the dog suddenly leans over something during a walk, it is likely to sniff or pick up such a thing. At this time, the owner should tighten the leash and shout the dog's name to let the dog Shift your attention from that thing to the owner. When the dog's attention is shifted from the ground to the owner, just like when you are just learning to walk, remember to keep the dog on your left side, and then give him some food as a reward. The owner should know that only by establishing a good relationship of trust with the dog can it be possible for the dog to obey your commands when there is a problem with the walk.We are a supplier and manufacturer of Leash For Dogs,Pet Cooling Collar in China, providing low-cost,Walking Pet Harness , etc.
Pet Collars And Leashes,Leash For Dogs,Pet Cooling Collar,Walking Pet Harness
Mianyang Crossing Cross-Border E-Commerce Co., Ltd. , https://www.wycybag.com