In place of GB 191-85 Packaging- Picoral markings for nandling of goods GB5892-86
This standard refers to the use of the international standard IS0780-1985 "Package Cargo Graphic Symbol."
1 Theme Content and Scope of Application This standard specifies the name, size, color and usage of the packaging, storage, and transportation icons.
This standard applies to the transport packaging of various goods.
There are 12 kinds of logos and names of logos. There are 12 kinds of pictograms. The figures and names are as shown in Table 1.
3 The size and color of the logo
3.1 Size of Signs The size of signs is generally divided into four types, as shown in Table 2.
Table 2
Note: In the case of oversized or extremely small shipping packages, the size of the logo can be expanded or reduced as appropriate in Table 2.
3.2 Logo color The logo color is generally black. If the color of the package makes the iconic logo appear unclear, other colors may be used for printing. The appropriate contrasting color may also be selected on the printed surface. Red and orange should generally be avoided. The pasted logo is printed in black on white.
4 How to use the logo
4.1 The marking of markings can be printed, pasted, hung, nailed and sprayed. When printing, the outer frame line and the name of the logo must be printed; when spraying, the outer frame line and the name of the logo can be omitted.
4.2 The number and location of signs are as follows:
4.2.1 box packaging: located in the obvious place of packaging;
Bags, bundles of packaging: located in the barrel or lid; barrel-shaped packaging: located in the barrel or lid;
Containers, Grouped Goods: Paste four
4.2.2 The following provisions apply to signs 6 and 8.
The sign 6 "Here is lifted" should be marked on the actual lifting position on the two opposite sides of the package.
The mark 8 "center of gravity" should be marked on the four sides that correctly mark the actual center of gravity of the package.
4.3 The writing of the logo shall be parallel to the bottom edge; the export goods shall be marked according to the relevant provisions of foreign trade; the pasted logo shall be guaranteed not to fall off during the storage and transportation of the goods.
4.4 What kind of signs should be marked on the transport package should be correctly selected according to the nature of the goods.
4.5 The mark is marked by the production unit before the goods leave the factory. After the delivery, if the packaging is changed, the mark is changed by the packaging unit.
Additional information:
This standard was proposed by the Ministry of Railways
This standard is under the jurisdiction of the Ministry of Railways Standardization Institute and responsible for drafting.
This standard was first released in October 1963, revised in September 1973 for the first time, and revised in June 1985 for the second time.
The main drafters of this standard are Zhang Jin and Wang Jugang.
This standard is commissioned by the Institute of Standards Lecturer of the Ministry of Railways to explain.
Lanyard
1.What is lanyard:
A lanyard is a cord or strap that is worn around the neck to hold an identification badge, whistle, keys or other small object. You can see lanyards in use everywhere by businesses, schools, hospitals, at special events, conventions, reunions, and in many recreationall activities.
2.Lanyard Category:
Based on different material used for lanyard production, here are five kinds of Zipper: Heat Transfer Lanyard , Silk-Screen Lanyard , Silicone Lanyard, Zipper Lanyard and Jacquard Lanyard.
2.1. Heat Transfer Lanyard
Sublimation Lanyard is designed in the pattern, production copperplate, electric carving through the mechanical sub-color pattern engraved on copperplate. Copperplate printing machine and then get on the pattern printed on the PET film, and then through the mechanical heat transfer lanyard pattern is transferred to the product.
Sublimation lanyard content can be product brands, publicity posters, slogans, may also be sporting events, concerts, commercial activities, the name and other gatherings LOGO. Nylon, cotton, bamboo fiber can not withstand high temperatures, and high cost to go through a special process to heat transfer lanyard.Such as custom printed lanyard,double hook lanyard.
2.2. Silk-Screen Lanyard
Silk webbing lanyard is the production process LOGO traditional common expression, LOGO is printing ink by screen printing on the surface of the webbing. Printing out of LOGO texture clear, strong sense of three-dimensional, high definition, good adhesion.
Generally can be divided into screen printing lanyard phone lanyard, U disk lanyard, MP3 lanyard, working lanyard, lanyard exhibition, documents cards sling, brand badge lanyard, badge lanyard, lanyard visit visitors Wait. Product brands, publicity posters, slogans, may also be sporting events, concerts, commercial activities, the name and other gatherings LOGO.
2.3. Silicone Lanyard
Silica gel is silica gel mSiO2 · nH2O made of a suitable dehydrating porous materials of different particle sizes. Has an open porous structure, specific surface area (surface area per unit mass) is large, can absorb many substances, it is a good desiccant, adsorbent and catalyst supports.
Silica gel lanyard using silica gel as a material made of, but not limited to mobile phone ornaments, can be widely used in MP3, MP4, digital cameras, small flashlights and other products of the match.
2.4. Zipper Lanyard
Zipper lanyard and zipper is shaped the same,It is the perfect companion for the mobile phone, brand certificate, key ring. Beautiful and practical zipper manufacturing plating with laser engraving and other advanced technology refined elegance applicable Peigua digital cameras MP3 U disk, PU rope, PVC rope, zipper cell phone rope, rope, harnesses, hand Wan belt.In addition to metal beads, other materials can be printed corporate LOGO logo, and in different parts and assembly methods, play publicity, promotional purposes. According to customer needs, design and manufacture many styles, diverse fashion lanyard!
2.5. Jacquard Lanyard
Jacquard Ribbon Ribbon is a high-grade varieties.
Jacquard Ribbon generally used for high profile clothing materials or decoration materials (such as curtains, sand release material). Jacquard manufacturing process complicated. Warp and weft interwoven ups and downs, to form different patterns, convex, more weave flowers, birds, fish, insects, animals and other beautiful patterns.
Jacquard Ribbon soft, delicate, unique and smooth texture, good gloss, good drape and breathability, color fastness (yarn dyeing). Weft jacquard pattern amplitude with large and beautiful, color structured three-dimensional sense, and by the Jacquard pattern is relatively simple, relatively simple.
Lanyards,Custom Lanyard,Key Lanyards,Custom Lanyards,Lanyards For Keys
Shenzhen Yiyixing Zipper Manufacture Co.,Ltd , https://www.yyxzip.com