Analysis of printing quality problems (17-26)

17. Printing water stains


It is a stain or spot caused by water droplets. This is due to the fact that the fabric is dripped or splashed with water droplets for a period of time before the end of steaming after printing.

18-1. Scraper Bars


That is, the belt-like contamination in the radial printing appears in the roller printing. The rickets occur when the pressure of the printing blade is insufficient or impurities adhere.

18-2. Scraper Blades (Dragging)


18-3. Squeegee Strip (Deep Scratch)


19. The color is not clean or bad


The effect of pulling white, color or anti-inking is not clear. More often occurs in the case of improper control, discharge of paste, color paste, squeegee pressure or hair color (vaporization) conditions.

20. Color paste chapped


Department of printing due to color paste cracks caused by the pattern defects. More due to improper post-printing or color paste viscosity is inappropriate.

21. Rope streaks


Traces formed by traces of cords or rods used in the steaming process are left on the calico. More often occurs when the temperature of the steaming process is too high or the setting temperature is too low.

22. Rope strips


This is due to discoloration or staining caused by the printing cloth contacting the string or rod in the steaming process. Mostly caused by vapor condensation on the string or rod.

23. Detaching or scarring


It is due to the needle or cloth clip of the stenter or the abnormality caused by the inside. Due to the poor stitching or defect of the stenter, the track is not normal and the fabric width is abnormal.

24. White spot


It is a defect formed by the fact that a part of the pattern cannot be printed. More often than not, the presence of foreign matter or fabric yarns or foreign matter on the screen film causes the color paste not to print.

25. Cracking


It is exposed when the fabric is stretched or the fabric is bent. In many cases, color paste viscosity, screen mesh, squeegee pressure and other conditions caused by poor penetration of color paste occurs.

26. Ripples (cloud spots)


The ripples appear on the printed pattern. More often than not, the screen grooves of the screen or the pattern grooves of the printing drum and the yarn organization of the printing fabric overlap with each other to cause interference.

Aquamarine Gemstone meaning

This is the stone to help you be in touch with your spiritual being. This stone is used in deep meditations.

Aquamarine is a blue-green stone that comes from Colombia and Brazil. It has been called "Water of the Sea", because of its color. The aquamarine is the stone of sailors, believing it would be protection for them on water. Folklore says the aquamarine will protect against gossip. It is also said the aquamarine will pick up spirits. It is an excellent stone to use for meditating.

Aquamarine is most powerful as a meditation stone, as it brings a great peace and serenity. Some people can meditate on an Aquamarine to receive the wisdom to see truth, but this is a very advanced meditation.

Healing properties of Aquamarine

Aquamarine is often associated with the thymus gland. It is very soothing worn as a necklace. Healers use it to help reduce fluid retention. It has been used to calm the nerves.

The Romans used the aquamarine for diseases of the stomach, and believed it could cure liver and throat troubles.

Aquamarine

Natural Aquamarine, Aquamarine Gemstone, Aquamarine jewelry, Aquamarine jewellery, Aquamarine crystal, Aquamarine, crystal jewelry, semi precious stone jewelry, gemstone jewelry

JOYA GIFT CO.,LIMITED , http://www.joyagifts.com

Posted on